MODEL: M6NXF2

M6NXF2 SPECIFICATIONS

ES-7918 Rev.6 Page 3/5

http://www.m-system.co.jp/

For selector functions, it equals that of the selected signal.

**Inversely proportional to the span.

Temp. coefficient: ±0.01 %/°C (±0.006 %/°F) of max. span

Response time: ≤ 0.5 sec. (0 – 90 %)

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 2000 V AC @1 minute (input to output

to power to ground)

CALCULATION EXAMPLES OF OVERALL ACCURACY

[Example] Function: Temperature compensation w/o square

Input 1: Type -10 – +10 V / range 1 – 5 V

Input 2: Type 0 – 50 mA / range 4 – 20 mA

Output: Type 0 – 20 mA / range 4 – 20 mA

Input 1 = Max. Input Range (20 V) ÷ Span (4 V) × 0.05% =

0.25%

Input 2 = Max. Input Range (50 mA) ÷ Span (16 mA) ×

0.1% = 0.31%

Output = Max. Output Range (20 mA) ÷ Span (16 mA) ×

0.04% = 0.05%

Accuracy = 0.31% (input 2 > input 1) + 0.05% = 0.36%

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

RoHS Directive

EN 50581

EXTERNAL VIEW

■ FRONT VIEW (with the cover open)

■ SIDE VIEW

5

6

7

8

1

2

3

4

Output Range Selectors

Input Range Selectors

Status Indicator LED

Power LED

Configurator Jack

The DIP switch setting is required to select input and output

types before setting a precise range using PC Configurator

Software (model: M6CFG).

Refer to the instruction manual for detailed procedures.