MODEL: M6NXF2

M6NXF2 SPECIFICATIONS

ES-7918 Rev.6 Page 1/5

http://www.m-system.co.jp/

Screw Terminal Ultra-Slim Signal Conditioners M6N Series

2-INPUT MATH FUNCTION MODULE

(PC programmable)

Functions & Features

• 7.5-mm wide ultra-slim design

• Low profile allows the M6N module mounted in a 120-mm

deep panel

• 2-input math functions and signal selector functions

• PC programmable

• High-density mounting

• Power indicator LED

mm (inch)

7.5 (.30)

102

(4.02)

102

(4.02)

MODEL: M6NXF2-[1][2][3]-R[4]

ORDERING INFORMATION

• Code number: M6NXF2-[1][2][3]-R[4]

Specify a code from below for each [1] through [4].

(e.g. M6NXF2-S2Z1Z1-R/Q)

• Input 1 range (e.g. 1 – 5 V DC)

• Input 2 range (e.g. 4 – 20 mA DC)

• Output range (e.g. 4 – 20 mA DC)

• Specify the specification for option code /Q

(e.g. /C01/SET)

[1] INPUT 1

Current

Z1: Range 0 – 50 mA DC (Input resistance 24.9 Ω)

Voltage

S1: Range -1000 – +1000 mV DC (Input resistance 1 MΩ min.)

S2: Range -10 – +10 V DC (Input resistance 1 MΩ min.)

(Configurator software is used to change the input type and

precise range.)

[2] INPUT 2

Same range availability as Input 1

(Configurator software is used to change the input type and

precise range.)

[3] OUTPUT

Current

Z1: Range 0 – 20 mA DC

Voltage

V2: Range -10 – +10 V DC

V3: Range -5 – +5 V DC

(Configurator software is used to change the output type

and precise range.)

POWER INPUT

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

[4] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

EX-FACTORY SETTING

/SET: Preset according to the Ordering Information Sheet

(No. ESU-7848)

FUNCTIONS

PC Configurator Software is used to change function type.

Math Functions:

Temperature compensation (w/o square root extraction)

Temperature compensation (with square root extraction)

Pressure compensation (w/o square root extraction)

Pressure compensation (with square root extraction)

Addition / Subtraction

Multiplication

Division

Signal Selector Functions:

High selector

Low selector

RELATED PRODUCTS

• PC configurator software (model: M6CFG)

Downloadable at M-System’s web site.

A dedicated cable is required to connect the module to the

PC. Please refer to the internet software download site or

the users manual for the PC configurator for applicable

cable types.