MODEL: M6SPS2

M6SPS2 SPECIFICATIONS

ES-7984 Rev.8 Page 1/3

http://www.m-system.co.jp/

Tension-Clamp Ultra-Slim Signal Conditioners M6S Series

POWER SUPPLY MODULE

(dual redundant)

Functions & Features

• Maintenance-free tension clamp connection

• Supplies power to the M6S modules mounted on the

Installation Base

• High-density mounting

• Power indicator LED

5.9 (.23)

94

(3.70)

102

(4.02)

mm (inch)

MODEL: M6SPS2–R[1]

ORDERING INFORMATION

• Code number: M6SPS2-R[1]

Specify a code from below for [1].

(e.g. M6SPS2-R/UL/Q)

• Specify the specification for option code /Q

(e.g. /C01)

POWER INPUT

DC Power

R: 24 V DC

(Operational voltage range 22 – 27 V, ripple 10 %p-p max.)

[1] OPTIONS (multiple selections)

Standards & Approvals

blank: CE marking

/UL: UL approval, CE marking

Other Options

blank: none

/Q: Option other than the above (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

GENERAL SPECIFICATIONS

Connection: Tension clamp

Housing material: Flame-resistant resin (black)

Power LED: Green light turns on when the power is supplied.

INSTALLATION

Power input: 2 A (Total current consumed by signal

conditioners on the base must be 2 A or less.)

Operating temperature: -20 to +55°C (-4 to +131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Installation Base (model: M6SBS)

Weight: 60 g (2.1 oz)

PERFORMANCE

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 2000 V AC @1 minute (power to ground)

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

RoHS Directive

EN 50581

Approval:

UL/C-UL nonincendive Class I, Division 2,

Groups A, B, C, and D hazardous locations

(ANSI/ISA-12.12.01, CAN/CSA-C22.2 No.213)

UL/C-UL general safety requirements

(UL 61010-1, CAN/CSA-C22.2 No.61010-1)