MODEL: M6SBS

M6SBS SPECIFICATIONS

ES-7985 Rev.10 Page 1/5

http://www.m-system.co.jp/

Tension-Clamp Ultra-Slim Signal Conditioners M6S Series

INSTALLATION BASE

Functions & Features

• Backplane to collectively supply power to the M6S

modules in combination with the Power Supply Module

(model: M6SPSx or M6-PSM)

MODEL: M6SBS–[1][2]

ORDERING INFORMATION

• Code number: M6SBS-[1][2]

Specify a code from below for each [1] and [2].

(e.g. M6SBS-08/UL/Q)

• Specify the specification for option code /Q

(e.g. /C01)

[1] NUMBER OF SLOTS

08: 8 slots

08P: 8 slots (for extension)

08A: 8 slots + power supply slot (for model M6-PSM)

(UL not available)

[2] OPTIONS (multiple selections)

Standards & Approvals

blank: CE marking

/UL: UL approval, CE marking

Other Options

blank: none

/Q: Option other than the above (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

Only solder side of the main PWB is coated.

/C01: Silicone coating

/C02: Polyurethane coating

RELATED PRODUCTS

• M6S series signal conditioners (Not able to supply to AC

power signal conditioners (M2 code))

• Power supply module (model: M6SPS1)

• Power supply module (model: M6SPS2)

• Power supply module (model: M6-PSM)

• Blank filler module (model: M6SDM)

GENERAL SPECIFICATIONS

Capacity: Up to 48 modules (including power supply

module) with Extension Bases (The usable number of signal

conditioners depends on the capacity of the power supply

module. Refer to the M6-PSM specification sheets.)

Isolation: Power to ground

INSTALLATION

Operating temperature: -20 to +55°C (-4 to +131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Atmosphere: No corrosive gas or heavy dust

Mounting: Surface or DIN rail

Weight:

M6SBS-08, -08P: 50 g (1.8 oz) without signal conditioners

M6SBS-08A: 80 g (2.8 oz) without signal conditioners

PERFORMANCE

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 2000 V AC @1 minute (power to ground)

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

RoHS Directive

EN 50581

Approval:

UL/C-UL nonincendive Class I, Division 2,

Groups A, B, C, and D

(ANSI/ISA-12.12.01, CAN/CSA-C22.2 No.213)

UL/C-UL general safety requirements

(UL 61010-1, CAN/CSA-C22.2 No.61010-1)