MODEL: M6SXF2

M6SXF2 SPECIFICATIONS

ES-7988 Rev.6 Page 1/5

http://www.m-system.co.jp/

Tension-Clamp Ultra-Slim Signal Conditioners M6S Series

2-INPUT MATH FUNCTION MODULE

(PC programmable)

Functions & Features

• Maintenance-free tension clamp connection

• 5.9-mm wide ultra-slim design

• Low profile allows the M6S module mounted in a 120-mm

deep panel

• 2-input math functions and signal selector functions

• PC programmable

• High-density mounting

• Power indicator LED

5.9 (.23)

94

(3.70)

102

(4.02)

mm (inch)

MODEL: M6SXF2-[1][2][3]-R[4]

ORDERING INFORMATION

• Code number: M6SXF2-[1][2][3]-R[4]

Specify a code from below for each [1] through [4].

(e.g. M6SXF2-S2Z1Z1-R/Q)

• Input 1 range (e.g. 1 – 5 V DC)

• Input 2 range (e.g. 4 – 20 mA DC)

• Output range (e.g. 4 – 20 mA DC)

• Specify the specification for option code /Q

(e.g. /C01/SET)

[1] INPUT 1

Current

Z1: Range 0 – 50 mA DC (Input resistance 24.9 Ω)

Voltage

S1: Range -1000 – +1000 mV DC (Input resistance 1 MΩ min.)

S2: Range -10 – +10 V DC (Input resistance 1 MΩ min.)

(Configurator software is used to change the input type and

precise range.)

[2] INPUT 2

Same range availability as Input 1

(Configurator software is used to change the input type and

precise range.)

[3] OUTPUT

Current

Z1: Range 0 – 20 mA DC

Voltage

V2: Range -10 – +10 V DC

V3: Range -5 – +5 V DC

(Configurator software is used to change the output type

and precise range.)

POWER INPUT

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

[4] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

EX-FACTORY SETTING

/SET: Preset according to the Ordering Information Sheet

(No. ESU-7848)

FUNCTIONS

PC Configurator Software is used to change function type.

Math Functions:

Temperature compensation (w/o square root extraction)

Temperature compensation (with square root extraction)

Pressure compensation (w/o square root extraction)

Pressure compensation (with square root extraction)

Addition / Subtraction

Multiplication

Division

Signal Selector Functions:

High selector

Low selector

RELATED PRODUCTS

• PC configurator software (model: M6CFG)

Downloadable at M-System’s web site.

A dedicated cable is required to connect the module to the