MODEL: M6SVF

M6SVF SPECIFICATIONS

ES-7994 Rev.4 Page 1/3

http://www.m-system.co.jp/

Tension-Clamp Ultra-Slim Signal Conditioners M6S Series

SIGNAL TRANSMITTER

(high-accuracy, ultra-high speed response 30 μsec.)

Functions & Features

• Maintenance-free tension clamp connection

• 5.9-mm wide ultra-slim design

• Low profile allows the M6S module mounted in a 120-mm

deep panel

• Galvanically isolates process instrumentation signals

• 30-microsecond response

• Frequency characteristics 12 kHz (-3 dB)

• High-density mounting

• Power indicator LED

Typical Applications

• Isolation for a vibration analyzing system

• Isolation for Discharge/Charge tester

5.9 (.23)

94

(3.70)

102

(4.02)

mm (inch)

MODEL: M6SVF–[1]4W–R[2]

ORDERING INFORMATION

• Code number: M6SVF-[1]4W-R[2]

Specify a code from below for each [1] and [2].

(e.g. M6SVF-04W-R/Q)

• Special input range (For code 0: e.g. -164 – +164 mV DC)

• Specify the specification for option code /Q

(e.g. /C01)

[1] INPUT

Voltage

2W: -100 – +100 mV DC (Input resistance 1 MΩ min.)

4W: -10 – +10 V DC (Input resistance 1 MΩ min.)

5W: -5 – +5 V DC (Input resistance 1 MΩ min.)

8W: -20 – +20 V DC (Input resistance 1 MΩ min.)

0: Specify voltage

(Select input range as indicated below. Input resistance 1 MΩ min.)

-20 – +20 mV DC

-24 – +24 mV DC

-40 – +40 mV DC

-85 – +85 mV DC

-164 – +164 mV DC

-200 – +200 mV DC

-15 – +15 V DC

-25 – +25 V DC

-55 – +55 V DC

-60 – +60 V DC

OUTPUT

Voltage

4W: -10 – +10 V DC (Load resistance 2000 Ω min.)

POWER INPUT

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

[2] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

GENERAL SPECIFICATIONS

Connection

Input and output: Tension clamp

Power input: Via the Installation Base (model: M6SBS)

or Tension clamp

Housing material: Flame-resistant resin (black)

Isolation: Input to output to power

Overrange input: -5 to +105 %

Zero adjustment: -1 to +1 % (front)

Span adjustment: 99 to 101 % (front)

Power LED: Green light turns on when the power is supplied.

INPUT SPECIFICATIONS

Input resistance: 1 MΩ min. (3 kΩ min. at power loss)

OUTPUT SPECIFICATIONS

Parallel load capacitance: Max. 2000 pF