MODEL: M8PA

M8PA SPECIFICATIONS

ES-5486 Rev.6 Page 2/3

http://www.m-system.co.jp/

5 V pulse: ≤ 1 V

12 V, 24 V pulse: ≤ 4 V

■ AC Voltage Pulse: Specify amplitude and frequency.

Waveform: Sine

Input impedance: 10 kΩ min.

Input amplitude: 0.1 – 100 V p-p

Max. voltage between input terminals: 50 V

50V max.

Amplitude

Vinp-p

t

Volts

DC Offset

■ DC VOLTAGE PULSE

50V max.

Amplitude

Vinp-p

t

Volts

■ AC VOLTAGE PULSE

Detecting

Level

INSTALLATION

Current consumption: Approx. 50 mA

Operating temperature: 0 to 55°C (32 to 131°F)

Operating humidity: 30 to 95 %RH (non-condensing)

Mounting: Installation Base (model: M8BSx)

Weight: 70 g (2.5 oz)

PERFORMANCE in percentage of span

Accuracy: ±0.1 % (output 10 – 100 %)

Temp. coefficient: ±0.02 %/°C (±0.01 %/°F)

Response time: (0 – 90 %)

approx. 4 seconds for 0 – 50 Hz

approx. 3 seconds for 0 – 100 Hz

approx. 1 second for 0 – 200 Hz

approx. 0.4 seconds for 0 – 1.99 kHz

approx. 0.1 seconds for 0 – 2 kHz or more

Ripple: 0.2 %p-p max. with input ≥ 10 %

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength:

1500 V AC @1 minute (input to output 1 or output 2 or

power to ground)

500 V AC @1 minute (output 1 to output 2 to power)

SWC test: ANSI/IEEE-C37.90.1-1989