MODEL: M6SYV

M6SYV SPECIFICATIONS

ES-7971 Rev.7 Page 1/3

http://www.m-system.co.jp/

Tension-Clamp Ultra-Slim Signal Conditioners M6S Series

ISOLATOR

Functions & Features

• Maintenance-free tension clamp connection

• 5.9-mm wide ultra-slim design

• Low profile allows the M6S module mounted in a 120-mm

deep panel

• Galvanically isolates process instrumentation signals

• High-density mounting

• Power indicator LED

5.9 (.23)

94

(3.70)

102

(4.02)

mm (inch)

MODEL: M6SYV-[1][2]-[3][4]

ORDERING INFORMATION

• Code number: M6SYV-[1][2]-[3][4]

Specify a code from below for each [1] through [4].

(e.g. M6SYV-4W4W-R/K/UL/Q)

• Specify the specification for option code /Q

(e.g. /C01)

[1] INPUT / [2] OUTPUT

AA: 4 - 20 mA DC (Input resistance 50 Ω)

/ 4 - 20 mA DC (Load resistance 550 Ω max.)

A6: 4 - 20 mA DC (Input resistance 50 Ω)

/ 1 - 5 V DC (Load resistance 5000 Ω min.)

6A: 1 – 5 V DC (Input resistance 1 MΩ min.)

/ 4 - 20 mA DC (Load resistance 550 Ω max.)

66: 1 - 5 V DC (Input resistance 1 MΩ min.)

/ 1 - 5 V DC (Load resistance 5000 Ω min.)

4W4W: -10 - +10 V DC (Input resistance 1 MΩ min.)

/ -10 - +10 V DC (Load resistance 20 kΩ min.)

[3] POWER INPUT

AC Power

M2: 100 – 240 V AC (Operational voltage range 90 – 264 V,

47 – 66 Hz)

(UL not available)

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

[4] OPTIONS (multiple selections)

Response Time (0 – 90 %)

blank: Standard (≤ 0.5 sec.)

/K: Fast Response (Approx. 3.5 msec. voltage output;

Approx. 25 msec. current output)

Standards & Approvals

blank: CE marking

/UL: UL approval, CE marking

Other Options

blank: none

/Q: Option other than the above (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

GENERAL SPECIFICATIONS

Connection

Input and output: Tension clamp

Power input: Via the Installation Base (model: M6SBS)

(not available for AC power input)

or Tension clamp

Housing material: Flame-resistant resin (black)

Isolation: Input to output to power

Zero adjustment: -2 to +2 % (front)

(Output code 4W: Adjustable at 0 V.)

Span adjustment: 98 to 102 % (front)

Power LED: Green light turns on when the power is supplied.

INPUT SPECIFICATIONS

■ DC Current: Input resistor incorporated

INSTALLATION

Power Consumption

•AC: Max. 2 VA

•DC: Approx. 0.45 W

Operating temperature: -20 to +55°C (-4 to +131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Installation Base (model: M6SBS) or DIN rail

Weight: 60 g (2.1 oz)