MODEL: M8PP

M8PP SPECIFICATIONS

ES-5484 Rev.10 Page 2/5

http://www.m-system.co.jp/

(10 msec. min. for 0 – 10 Hz)

One-shot: 1 msec. min.

■ Dry Contact

Max. frequency: 100 kHz

Sensing: Approx. 12 V DC @3 mA

ON/OFF level: ≥ 4 kΩ/6 V at OFF

≤ 1.3 kΩ/4 V at ON

■ DC Voltage Pulse: Specify detecting level, amplitude and

DC offset.

Max. frequency: 100 kHz

Waveform: Square or sine

Input impedance: 30 kΩ min.

Input amplitude: 2 – 50 V p-p

Max. voltage between input terminals: 50 V

• 5 V, 12 V, 24 V Pulse

Max. frequency: 100 kHz

Waveform: Square or sine

Input impedance: 30 kΩ min.

Detecting H level

5 V pulse: ≥ 3 V

12 V, 24 V pulse: ≥ 6 V

Detecting L level

5 V pulse: ≤ 1 V

12 V, 24 V pulse: ≤ 4 V

■ AC Voltage Pulse: Specify amplitude and frequency.

Max. frequency: 50 kHz

Min. frequency: 1 Hz

Waveform: Sine

Input impedance: 10 kΩ min.

Input amplitude: 0.1 – 100 V p-p

Max. voltage between input terminals: 50 V

■ Two-wire Current Pulse

Max. frequency: 100 kHz

Input resistance: Receiving resistor 250 Ω

Input range: 0 – 25 mA

Detecting level: ≤ 4 mA for Lo, ≥ 12 mA for Hi

50V max.

Amplitude

Vinp-p

t

Volts

50V max.

Amplitude

Vinp-p

t

Volts

DC Offset

Detecting

Level

Amplitude

I inp-p

t

Current

0mA

I Pulse

• DC Voltage Pulse

• AC Voltage Pulse

• Two-wire Current Pulse

Detecting

Level

OUTPUT SPECIFICATIONS

Max. frequency: 100 kHz

■ Open Collector: 50 V DC @50 mA

Saturation voltage: 0.5 V DC

■ 5 V Pulse

Hi level: 5 V ±10 %

Lo level: ≤ 0.5 V

Load resistance: 1000 Ω min.

OUTPUT PULSE WIDTH

• One-shot Output: Constant pulse width

Output Frequency (Hz) = 500 ÷ Output Pulse Width (msec.)

Pulse width: 1 – 500 msec. (standard 50 msec. ±20 %)

INSTALLATION

Current consumption: Approx. 90 mA

Operating temperature: 0 to 55°C (32 to 131°F)

Operating humidity: 30 to 95 %RH (non-condensing)

Mounting: Installation Base (model: M8BSx)

Weight: 70 g (2.5 oz)