MODEL: M60SVS

M60SVS SPECIFICATIONS

ES-8022 Rev.1 Page 1/3

http://www.m-system.co.jp/

Base-free Interconnecting Ultra-Slim Signal Conditioners M60S Series

SIGNAL TRANSMITTER

(field-configurable)

Functions & Features

• Converts DC input from a sensor into a standard process

signal

• Output range and response time selectable with DIP SW

• Power connector for interconnecting modules and

collectively supplying power

• Spring clamp terminal connection for easy wiring

• 6-mm wide ultra-slim design

• Low profile allows mounting in a 120-mm deep panel

• High-density mounting

• Power indicator LED

8 (.31)

mm (inch

)

108 (4.25)

102 (4.02)

MODEL: M60SVS-R[1]

ORDERING INFORMATION

• Code number: M60SVS-R[1]

Specify a code from below for [1].

(e.g. M60SVS-R/Q)

• Specify the specification for option code /Q

(e.g. /C01)

• Default at shipment

Input range: 4 – 20 mA DC

Output range: 4 – 20 mA DC

Response time: Standard response

INPUT – Field-selectable

Current

4 – 20 mA DC (Input resistance 50 Ω)

0 – 20 mA DC (Input resistance 50 Ω)

Voltage

0 – 10 V DC (Input resistance 200 kΩ min.)

2 – 10 V DC (Input resistance 200 kΩ min.)

0 – 5 V DC (Input resistance 100 kΩ min.)

1 – 5 V DC (Input resistance 100 kΩ min.)

OUTPUT – Field-selectable

Current

4 – 20 mA DC (Load resistance 550 Ω max.)

0 – 20 mA DC (Load resistance 550 Ω max.)

Voltage

0 – 10 V DC (Load resistance 10 kΩ min.)

2 – 10 V DC (Load resistance 10 kΩ min.)

0 – 5 V DC (Load resistance 5000 Ω min.)

1 – 5 V DC (Load resistance 5000 Ω min.)

POWER INPUT

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

[1] OPTIONS

blank: none

/Q: Options other than the above (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

GENERAL SPECIFICATIONS

Connection

Input and output: Spring clamp terminal

Power input: Via the power connector or the spring clamp

terminal

Housing material: Flame-resistant resin (black)

Isolation: Input to output to power

Zero adjustment: -2 to +2 % (front)

Span adjustment: 98 to 102 % (front)

Power LED: Green LED turns on when the power is supplied.

INPUT SPECIFICATIONS

■ DC Current: Input resistor incorporated

INSTALLATION

Power consumption: Max. 0.6 W

Power input: Max. 3 A (Total current consumed by the

interconnected signal conditionerse must be 3 A or less.)

Operating temperature: -20 to +55°C (-4 to +131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Atmosphere: No corrosive gas or heavy dust

Mounting: DIN rail

Weight: 65 g (2.3 oz)