MODEL: M60SYV

M60SYV SPECIFICATIONS

ES-8021 Rev.0 Page 1/3

http://www.m-system.co.jp/

Base-free Interconnecting Ultra-Slim Signal Conditioners M60S Series

ISOLATOR

Functions & Features

• Converts DC input from a sensor into a standard process

signal

• Power connector for interconnecting modules and

collectively supplying power

• Spring clamp connection for easy wiring

• 6-mm wide ultra-slim design

• Low profile allows mounting in a 120-mm deep panel

• High-density mounting

• Power indicator LED

8 (.31)

mm (inch

)

108 (4.25)

102 (4.02)

MODEL: M60SYV-[1][2]-R[3]

ORDERING INFORMATION

• Code number: M60SYV-[1][2]-R[3]

Specify a code from below for each of [1] through [3].

(e.g. M60SYV-4W4W-R/K/Q)

• Specify the specification for option code /Q

(e.g. /C01)

[1] INPUT / [2] OUTPUT

AA: 4 - 20 mA DC (Input resistance 50 Ω)

/ 4 - 20 mA DC (Load resistance 550 Ω max.)

A6: 4 - 20 mA DC (Input resistance 50 Ω)

/ 1 - 5 V DC (Load resistance 5000 Ω min.)

6A: 1 – 5 V DC (Input resistance 1 MΩ min.)

/ 4 - 20 mA DC (Load resistance 550 Ω max.)

66: 1 - 5 V DC (Input resistance 1 MΩ min.)

/ 1 - 5 V DC (Load resistance 5000 Ω min.)

4W4W: -10 - +10 V DC (Input resistance 1 MΩ min.)

/ -10 - +10 V DC (Load resistance 20 kΩ min.)

POWER INPUT

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

[3] OPTIONS (multiple selections)

Response Time (0 – 90 %)

blank: Standard response (≤ 0.5 sec.)

/K: Fast Response (≤ 5 msec.)

Other Options

blank: none

/Q: Option other than the above (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

GENERAL SPECIFICATIONS

Connection

Input and output: Spring clamp terminal

Power input: Via the power connector or the spring clamp

terminal

Housing material: Flame-resistant resin (black)

Isolation: Input to output to power

Zero adjustment: -2 to +2 % (front)

(Output code 4W: Adjustable at 0 V.)

Span adjustment: 98 to 102 % (front)

Power LED: Green LED turns on when the power is supplied.

INPUT SPECIFICATIONS

■ DC Current: Input resistor incorporated

INSTALLATION

Power consumption: Max. 0.6 W

Power input: Max. 3 A (Total current consumed by the

interconnected signal conditionerse must be 3 A or less.)

Operating temperature: -20 to +55°C (-4 to +131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Atmosphere: No corrosive gas or heavy dust

Mounting: DIN rail

Weight: 65 g (2.3 oz)

PERFORMANCE in percentage of span

Accuracy: ±0.1 %

Temp. coefficient: ±0.01 %/°C (±0.006 %/°F)

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 1500 V AC @1 minute (input to output

to power to ground)