MODEL: M80YS

M80YS SPECIFICATIONS

ES-5397 Rev.0 Page 1/2

http://www.m-system.co.jp/

Super-mini Signal Conditioners M80 Series

OUTPUT ISOLATOR

Functions & Features

• Converts DC input into isolated standardized process

signal

• Isolates between analog output channels of a PLC

• Achieves space-saving and easy maintenance with Multi-

channel Installation Base

mm (inch)

14.0 (.55)

39.2

(1.54)

51.8 (2.04)

MODEL: M80YS-6[1]-R

ORDERING INFORMATION

• Code number: M80YS-6[1]-R

Specify a code from below for [1].

(e.g. M80YS-66-R)

INPUT

Voltage

6: 1 – 5 V DC (Input resistance 1 MΩ min.)

[1] OUTPUT

Current

A: 4 – 20 mA DC (Load resistance 600 Ω max.)

D: 0 – 20 mA DC (Load resistance 600 Ω max.)

Voltage

4: 0 - 10 V DC (Load resistance 5000 Ω min.)

5: 0 – 5 V DC (Load resistance 2500 Ω min.)

6: 1 – 5 V DC (Load resistance 2500 Ω min.)

4W: -10 – +10 V DC (Load resistance 5000 Ω min.)

POWER INPUT

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

RELATED PRODUCTS

• Installation Base (model: M80BSx)

This unit must be mounted on a dedicated base.

GENERAL SPECIFICATIONS

Construction: Plug-in

Housing material: Flame-resistant resin (gray)

Power supply: Via the Installation Base terminals

(model: M80BSx)

Isolation: Input to output to power

Zero adjustment: -5 to +5 % (front)

Span adjustment: 95 to 105 % (front)

INPUT SPECIFICATIONS

■ DC Voltage

Input resistance: 1 MΩ min. (10 kΩ min. in power failure)

INSTALLATION

Current consumption: Approx. 50 mA

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 5 to 95 %RH (non-condensing)

Mounting: Multi-channnel Installation Base (model: M80BSx)

Weight: 20 g (0.71 oz)

PERFORMANCE in percentage of span

Accuracy: ±0.1 %

Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)

Response time: ≤ 15 msec. (0 – 90 %)

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 1000 V AC @1 minute (input to output

to power to ground)

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

RoHS Directive

EN 50581