MODEL: PMS

PMS SPECIFICATIONS

ES-1352-E Rev.5 Page 1/3

http://www.m-system.co.jp/

Plug-in Signal Conditioners M-UNIT

POTENTIOMETER TRANSMITTER

(isolated)

Functions & Features

• Providing a DC output proportional to a

potentiometer or slidewire position input

• Constant voltage excitation allows use with pots with total

resistances from 100 Ω – 10 kΩ without affecting accuracy

• 50 % zero/span adjustments with minimal interaction

• Isolation up to 2000 V AC

• Fast response type available

• LCD meter

• High-density mounting

Typical Applications

• Tank levels

• Positions

50

(1.97)

127

(5)

80

(3.15)

mm (inch)

MODEL: PMS–[1]–[2][3]

ORDERING INFORMATION

• Code number: PMS-[1]-[2][3]

Specify a code from below for each of [1] through [3].

(e.g. PMS-A-B/E/K/Q)

• Special output range (For codes Z & 0)

• Specify the specification for option code /Q

(e.g. /C01/S01)

INPUT POTENTIOMETER

Total resistance 100 Ω – 10 kΩ

[1] OUTPUT

Current

A: 4 – 20 mA DC (Load resistance 750 Ω max.)

B: 2 – 10 mA DC (Load resistance 1500 Ω max.)

C: 1 – 5 mA DC (Load resistance 3000 Ω max.)

D: 0 – 20 mA DC (Load resistance 750 Ω max.)

E: 0 – 16 mA DC (Load resistance 900 Ω max.)

F: 0 – 10 mA DC (Load resistance 1500 Ω max.)

G: 0 – 1 mA DC (Load resistance 15 kΩ max.)

Z: Specify current (See OUTPUT SPECIFICATIONS)

Voltage

1: 0 – 10 mV DC (Load resistance 10 kΩ min.)

2: 0 – 100 mV DC (Load resistance 100 kΩ min.)

3: 0 – 1 V DC (Load resistance 100 Ω min.)

4: 0 – 10 V DC (Load resistance 1000 Ω min.)

5: 0 – 5 V DC (Load resistance 500 Ω min.)

6: 1 – 5 V DC (Load resistance 500 Ω min.)

4W: -10 – +10 V DC (Load resistance 2000 Ω min.)

5W: -5 – +5 V DC (Load resistance 1000 Ω min.)

0: Specify voltage (See OUTPUT SPECIFICATIONS)

[2] POWER INPUT

AC Power

B: 100 V AC

C: 110 V AC

D: 115 V AC

F: 120 V AC

G: 200 V AC (Not selectable with Option /UL)

H: 220 V AC (Not selectable with Option /UL)

J: 240 V AC (Not selectable with Option /UL)

DC Power

S: 12 V DC (Not selectable with Option /UL)

R: 24 V DC (Not selectable with Option /UL)

V: 48 V DC (Not selectable with Option /UL)

P: 110 V DC (Not selectable with Option /UL)

[3] OPTIONS (multiple selections)

Input Signal Indicator

blank: Without

/E: With (0.0 - 100.0 % display)

Response Time (0 – 90 %)

blank: Standard (≤ 0.5 sec.)

/K: Fast Response (Approx. 25 msec.)

Standards & Approvals

blank: Without UL

/UL: UL approval (Not selectable with /E)

Other Options

blank: none

/Q: Option other than the above (specify the specification)

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating (UL not available)

TERMINAL SCREW MATERIAL

/S01: Stainless steel (UL not available)