MODEL: MXV

MXV SPECIFICATIONS

ES-1717 Rev.12 Page 2/3

http://www.m-system.co.jp/

Overrange indication: LEDs blinking

Power saving mode: Displays turn off if the keys are

untouched for a preset time period

LEDs: Red; the PL1 turns on with negative polarity and the

PL2 with programming error.

INPUT SPECIFICATIONS

■ INPUT

Code S1: -1.00 – +1.00 V DC

Operational range: -1.15 – +1.15 V DC

Minimum increment: 10 mV

Code S2: -10.0 – +10.0 V DC

Operational range: -11.5 – +11.5 V DC

Minimum increment: 100 mV

Code S3: -30.0 – +30.0 V DC

Operational range: -34.5 – +34.5 V DC

Minimum increment: 100 mV

Notes:

-Set the 100 % input value with a larger value than the 0 %

input value.

-Inverted output is available with the configuration.

-Operational range is of -15 to +115 % or in the usable

range as indicated above.

Default setting:

Code S1: -1.00 – +1.00 V DC

Code S2: -10.0 – +10.0 V DC

Code S3: -30.0 – +30.0 V DC

OUTPUT SPECIFICATIONS

■ DC Current: 0.0 – 20.0 mA DC

Operational range: 0.0 – 24.0 mA DC

Minimum increment: 0.1 mA

Default setting: 4.0 – 20.0 mA DC

■ DC Voltage

Code V1: -1.00 – +1.00 V DC

Operational range: -1.15 – +1.15 V DC

Minimum increment: 10 mV

Code V2: -10.0 – +10.0 V DC

Operational range: -11.5 – +11.5 V DC

Minimum increment: 100 mV

Note: Set to the 100 % output with a larger value than the

0 % output value.

Default setting:

Code V1: -1.00 – +1.00 V DC

Code V2: -10.0 – +10.0 V DC

INSTALLATION

Power consumption

•AC:

approx. 3 VA at 100 V

approx. 4 VA at 200 V

approx. 5 VA at 264 V

•DC: Approx. 3.5 W (100 mA at 24 V)

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Surface or DIN rail

Weight: 450 g (0.99 lb)

PERFORMANCE

Accuracy: Input + output

Input: ±0.05 %

Output: ±0.05 %

Min. span required to ensure the accuracy:

20 % of the nominal I/O range

Display accuracy: Input accuracy ±1 digit

(with 0.0 – 100.0 scaling)

Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)

Response time: ≤ 0.5 sec. (0 – 90 %)

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 2000 V AC @1 minute (input to output

to power to ground)

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

Low Voltage Directive

EN 61010-1

Installation Category II

Pollution Degree 2

Input or output to power: Reinforced insulation (300 V)

Input to output: Basic insulation (300 V)

RoHS Directive

EN 50581