MODEL: RPPD

RPPD SPECIFICATIONS

ES-1693 Rev.20 Page 2/9

http://www.m-system.co.jp/

[8] POWER INPUT

AC Power

K: 85 – 132 V AC

(Operational voltage range 85 – 132 V, 47 – 66 Hz)

(CE not available)

DC Power

S: 12 V DC

(Operational voltage range 12 V ±10 %, ripple 10 %p-p max.)

(Option /CE Not available)

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

V: 48 V DC

(Operational voltage range 48 V ± 10 % , ripple 10 % p-p max.)

(CE not available)

P: 110 V DC

(Operational voltage range 85 – 150 V, ripple 10 %p-p max.)

(CE not available)

[9] OPTIONS (multiple selections)

Standards & Approvals

blank: Without CE

/CE: CE marking

Other Options

blank: none

/Q: Option other than the above (specify the specification)

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

TERMINAL SCREW MATERIAL

/S01: Stainless steel

FACTORY DEFAULT SETTING

■ SETTINGS FOR PULSE INPUT

INPUT 1, 2

• Dry Contact

Input

Semiconductor contact

Filter

No filter

Detecting level 0 – 15 V

2 V

Hysteresis 0 – 5 V

0.5 V

• Voltage pulse

Input waveform

Square wave

Input coupling

DC

Input amplitude

0.5 – 50 Vp-p

Input offset

≤ 50 V

Filter

No filter

Detecting level 0 – 15 V

Adjusted to 1/2

Hysteresis 0 – 5 V

0.5 V

• 5 V voltage pulse

Filter

No filter

• 12 V, 24 V voltage pulse

Filter

No filter

•

2-wire current pulse

ON current (H) 0–25 mA

14.5 mA

OFF current (L) 0–25 mA

9.5 mA

Filter

No filter

■ SETTINGS FOR PULSE OUTPUT

Output pulse width

50 msec.

INPUT 1, 2

GENERAL SPECIFICATIONS

Construction: Plug-in

Connection: M3.5 screw terminals

Screw terminal: Chromated steel (standard) or stainless

steel

Housing material: Flame-resistant resin (black)

Isolation: Input 1 or input 2 or sensor exc. to output 1 or

output 2 to power

DIP SW1 & SW2: Used for input spec. setting

Input monitor LED

PL1: Red LED blinks according to input 1.

PL2: Red LED blinks according to input 2.

Excitation adjustment: 5 – 24 V DC

Input pulse sensing: DC coupled standard or AC coupled

level