MODEL: SVFH

SVFH SPECIFICATIONS

ES-1324 Rev.2 Page 1/3

http://www.m-system.co.jp/

Plug-in Signal Conditioners M-UNIT

SIGNAL TRANSMITTER

(high dielectric strength)

Functions & Features

• Up to 5 kV isolation between input to output or power

input

• Terminal cover

• PWB coating

72

(2.83)

111

(4.37)

143

(5.63)

mm (inch)

MODEL: SVFH–[1][2]–R[3]

ORDERING INFORMATION

• Code number: SVFH-[1][2]-R[3]

Specify a code from below for each of [1] through [3].

(e.g. SVFH-04W-R/Q)

• Input range (e.g. -600 – +600 V DC)

• Specify the specification for option code /Q

(e.g. /C01)

[1] INPUT

Voltage

2W: -100 – +100 mV DC (Input resistance 1 MΩ min.)

4W: -10 – +10 V DC (Input resistance 1 MΩ min.)

5W: -5 – +5 V DC (Input resistance 1 MΩ min.)

0: Specify range (Please specify from the following input range.)

• -20 - +20 mV DC

• -40 - +40 mV DC

• -200 - +200 mV DC

• -250 - +250 V DC

• -500 - +500 V DC

• -600 - +600 V DC

• -700 - +700 V DC

• -1000 - +1000 V DC

• -1250 - +1250 V DC

• -1300 - +1300 V DC

• -1500 - +1500 V DC

• -2000 - +2000 V DC (CE not available)

[2] OUTPUT

Current

A: 4 – 20 mA DC (Load resistance 750 Ω max.)

D: 0 – 20 mA DC (Load resistance 750 Ω max.)

Voltage

3: 0 – 1 V DC (Load resistance 1000 Ω min.)

4: 0 – 10 V DC (Load resistance 10 kΩ min.)

5: 0 – 5 V DC (Load resistance 5000 Ω min.)

6: 1 – 5 V DC (Load resistance 5000 Ω min.)

4W: -10 – +10 V DC (Load resistance 10 kΩ min.)

5W: -5 – +5 V DC (Load resistance 5000 Ω min.)

7W: -7.5 – +7.5 V DC (Load resistance 7.5 kΩ min.)

POWER INPUT

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

[3] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

GENERAL SPECIFICATIONS

Connection: M4 screw terminals (torque 1.2 N·m)

Screw terminal: Chrome-plated steel

Housing material: Flame-resistant resin (black)

Isolation: Input to output to power

Overrange input: -5 to +105 % (±2000V DC max.)

Zero adjustment: -0.2 to +0.2 % (front)

Span adjustment: 99.8 to 100.2 % (front)

INPUT SPECIFICATIONS

■ DC Voltage

Input resistance: 1 MΩ min. (10 kΩ min. in power failure)

Overload input 1000% 3 min. (±2000V DC max.)

Overload input 300% 5 min. (±2000V DC max.)

INSTALLATION

Power consumption

•DC: ≤ 3 W

Operating temperature: -10 to +60°C (14 to 140°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Surface or DIN rail