MODEL: SVB

SVB SPECIFICATIONS

ES-1307 Rev.4 Page 1/3

http://www.m-system.co.jp/

Plug-in Signal Conditioners M-UNIT

SIGNAL TRANSMITTER

(wide-output)

Functions & Features

• Converts a DC input into a standard process signal

• Isolation up to 2000 V AC

• Fast response type available

• LCD meter

• Max. 30 V output available

• Load resistance 1500 Ω (20 mA output)

• High-density mounting

Typical Applications

• Isolation between control room and field instrumentation

50

(1.97)

127

(5)

80

(3.15)

mm (inch)

MODEL: SVB–[1][2]–[3][4]

ORDERING INFORMATION

• Code number: SVB-[1][2]-[3][4]

Specify a code from below for each of [1] through [4].

(e.g. SVB-6A-M2/E/K/Q)

• Special input and output ranges (For codes Z & 0)

• Specify the specification for option code /Q

(e.g. /C01/S01)

[1] INPUT

Current

A: 4 – 20 mA DC (Input resistance 250 Ω)

A1: 4 – 20 mA DC (Input resistance 50 Ω)

B: 2 – 10 mA DC (Input resistance 500 Ω)

C: 1 – 5 mA DC (Input resistance 1000 Ω)

D: 0 – 20 mA DC (Input resistance 50 Ω)

E: 0 – 16 mA DC (Input resistance 62.5 Ω)

F: 0 – 10 mA DC (Input resistance 100 Ω)

G: 0 – 1 mA DC (Input resistance 1000 Ω)

H: 10 – 50 mA DC (Input resistance 100 Ω)

J: 0 – 10 μA DC (Input resistance 1000 Ω)

K: 0 – 100 μA DC (Input resistance 1000 Ω)

GW: -1 – +1 mA DC (Input resistance 1000 Ω)

FW: -10 – +10 mA DC (Input resistance 100 Ω)

Z: Specify current (See INPUT SPECIFICATIONS)

Voltage

1: 0 – 10 mV DC (Input resistance 10 kΩ min.)

15: 0 – 50 mV DC (Input resistance 10 kΩ min.)

16: 0 – 60 mV DC (Input resistance 10 kΩ min.)

2: 0 – 100 mV DC (Input resistance 100 kΩ min.)

3: 0 – 1 V DC (Input resistance 1 MΩ min.)

4: 0 – 10 V DC (Input resistance 1 MΩ min.)

5: 0 – 5 V DC (Input resistance 1 MΩ min.)

6: 1 – 5 V DC (Input resistance 1 MΩ min.)

4W: -10 – +10 V DC (Input resistance 1 MΩ min.)

5W: -5 – +5 V DC (Input resistance 1 MΩ min.)

0: Specify voltage (See INPUT SPECIFICATIONS)

[2] OUTPUT

Current

A: 4 – 20 mA DC (Load resistance 750 - 1500 Ω)

B: 2 – 10 mA DC (Load resistance 1500 - 3000 Ω)

C: 1 – 5 mA DC (Load resistance 3000 - 6000 Ω)

D: 0 – 20 mA DC (Load resistance 750 - 1500 Ω)

E: 0 – 16 mA DC (Load resistance 935 - 1875 Ω)

F: 0 – 10 mA DC (Load resistance 1500 - 3000 Ω)

G: 0 – 1 mA DC (Load resistance 15k - 30kΩ)

DW: -20 – +20 mA DC (Load resistance 500 - 1000Ω)

FW: -10 – +10 mA DC (Load resistance 1000 - 2000Ω)

Z: Specify current (See OUTPUT SPECIFICATIONS)

Voltage

8: 0 – 20 V DC (Load resistance 2000 Ω min.)

9: 0 – 30 V DC (Load resistance 3000 Ω min.)

8W: -20 – +20 V DC (Load resistance 2000 Ω min.)

0: Specify voltage (See OUTPUT SPECIFICATIONS)

Caution: The load resistance must be within the indicated

range for adequate operation.

[3] POWER INPUT

AC Power

M2: 100 – 240 V AC (Operational voltage range 85 – 264 V,

47 – 66 Hz)

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

[4] OPTIONS (multiple selections)

Input Signal Indicator

blank: Without

/E: With (0.0 - 100.0 % display)

Response Time (0 – 90 %)

blank: Standard (≤ 0.5 sec.)

/K: Fast Response (≤ 25 msec.)