MODEL: W2YV

W2YV SPECIFICATIONS

ES-5520 Rev.8 Page 1/3

http://www.m-system.co.jp/

Space-saving Dual Output Signal Conditioners

Mini-MW Series

ISOLATOR

Functions & Features

• Galvanically isolating the input and output signals

• Universal power input

• High-density mounting

Typical Applications

• Isolation between control room and field instrumentation

• Eliminating ground loops

Model

SPAN

ZERO

SPAN

ZERO

88.5

(3.49)

29.5 (1.16)

124

(4.88)

mm (inch)

MODEL: W2YV–[1][2][3]-[4][5]

ORDERING INFORMATION

• Code number: W2YV-[1][2][3]-[4][5]

Specify a code from below for each of [1] through [5].

(e.g. W2YV-6A6-M/Q)

• Specify the specification for option code /Q

(e.g. /C01 /V01)

Note: When the user requires a current and a voltage

output, specify the current to be the Output 1 which allows

a greater load.

[1] INPUT

Current

A: 4 – 20 mA DC (Input resistance 250 Ω)

Voltage

6: 1 – 5 V DC (Input resistance 1 MΩ min.)

[2] OUTPUT 1

Current

A: 4 – 20 mA DC (Load resistance 750 Ω max.)

Voltage

6: 1 – 5 V DC (Load resistance 5000 Ω min.)

[3] OUTPUT 2

Y: None

Current

A: 4 – 20 mA DC (Load resistance 350 Ω max.)

Voltage

6: 1 – 5 V DC (Load resistance 5000 Ω min.)

[4] POWER INPUT

AC Power

M: 85 – 264 V AC (Operational voltage range 85 – 264 V,

47 – 66 Hz)

DC Power

R2: 11 – 27 V DC

(Operational voltage range 11 – 27 V, ripple 10 %p-p max.)

[5] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

ADJUSTMENT

/V01: Multi-turn fine adjustment

TERMINAL SCREW MATERIAL

/S01: Stainless steel

GENERAL SPECIFICATIONS

Construction: Plug-in

Connection: M3 screw terminals (torque 0.8 N·m)

Screw terminal: Chromated steel (standard) or stainless

steel

Housing material: Flame-resistant resin (black)

Isolation: Input to output 1 to output 2 to power

Overrange output: Approx. -10 to +120 % at 1 – 5 V

Zero adjustment: -5 to +5 % (front)

Span adjustment: 95 to 105 % (front)

Adjustable individually for each output 1 and output 2.

INPUT SPECIFICATIONS

■ DC Current:

Shunt resistor attached to the input terminals (0.5 W)