MODEL: W2XR

W2XR SPECIFICATIONS

ES-5503 Rev.7 Page 1/4

http://www.m-system.co.jp/

Space-saving Dual Output Signal Conditioners

Mini-MW Series

RTD TRANSMITTER

(PC programmable)

Functions & Features

• Accepts direct input from a RTD

• 4-wire connection available

• Two independent output ranges

• Linearization and burnout

• PC programmable

• High-density mounting

Typical Applications

• Long distance transmission between the RTD

and the transmitter

• Combination with intrinsic safety barriers

88.5

(3.48)

29.5 (1.16)

124

(4.88)

mm (inch)

MODEL: W2XR–[1][2][3]-[4][5]

ORDERING INFORMATION

• Code number: W2XR-[1][2][3]-[4][5]

Specify a code from below for each [1] through [5].

(e.g. W2XR-4Z1V3-M2/N/Q)

• Temperature range (e.g. 0 – 100°C)

• Output 1 range (e.g. 4 – 20 mA DC)

• Output 2 range (e.g. 1 – 5 V DC)

• Specify the specification for option code /Q

(e.g. /C01/S01/SET)

Note: If one of the outputs should be a current range,

specify it for the Output 1 to allow a greater load.

[1] INPUT RTD

1: JPt 100 (JIS'89)

(Usable range: -200 to +500°C, -328 to +932°F; min.span: 20°C, 36°F)

3: Pt 100 (JIS'89)

(Usable range: -200 to +650°C, -328 to +1202°F; min.span: 20°C, 36°F)

4: Pt 100 (JIS'97, IEC)

(Usable range: -200 to +850°C, -328 to +1562°F; min.span: 20°C, 36°F)

5: Pt 50 Ω (JIS'81)

(Usable range: -200 to +649°C, -328 to +1200°F; min.span: 20°C, 36°F)

7: Pt 1000

(Usable range: -200 to +850°C, -328 to +1562°F; min.span: 20°C, 36°F)

9: Cu 10 @25°C

(Usable range: -50 to +250°C, -58 to +482°F; min.span: 20°C, 36°F)

0: Specify (Please provide a resistance table.)

(Configurator software is used to change the input type and

precise range.)

[2] OUTPUT 1

Current

Z1: Range 0 – 20 mA DC

Voltage

V2: Range -10 – +10 V DC

V3: Range -5 – +5 V DC

(Configurator software is used to change output over the

described range of the selected suffix code.

For changing between suffix codes, set the Output Range

Selector on the side of unit before software adjustment.)

[3] OUTPUT 2

Same range availability as Output 1

Y: None

(Configurator software is used to change output over the

described range of the selected suffix code.

For changing between suffix codes, set the Output Range

Selector on the side of unit before software adjustment.)

[4] POWER INPUT

AC Power

M2: 100 – 240 V AC (Operational voltage range 85 – 264 V,

47 – 66 Hz)

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

R2: 11 – 27 V DC

(Operational voltage range 11 – 27 V, ripple 10 %p-p max.)

P: 110 V DC

(Operational voltage range 85 – 150 V, ripple 10 %p-p max.)

[5] OPTIONS (multiple selections)

Standards & Approvals (must be specified)

/N: Without CE

Other Options

blank: none

/Q: Option other than the above (specify the specification)