MODEL: W5TS

W5TS SPECIFICATIONS

ES-8512 Rev.8 Page 2/4

http://www.m-system.co.jp/

TERMINAL SCREW MATERIAL

/S01: Stainless steel

GENERAL SPECIFICATIONS

Construction: Terminal block

Connection

Input: M3.5 screw terminals (torque 0.8 N·m)

Output & power: M3 screw terminals (torque 0.8 N·m)

Screw terminal: Nickel-plated steel (standard) or stainless

steel

Housing material: Flame-resistant resin (black)

Isolation: Input to output 1 to output 2 to power

Overrange output: Approx. -10 to +120 % at 1 – 5 V

Zero adjustment: -2 to +2 % (front)

Span adjustment: 98 to 102 % (front)

At burnout: Downscale ≤ -10 %, Upscale ≥ 110 %,

For output code 4W, Downscale ≤ -3%, Upscale ≥ 103%

Linearization: Standard

Cold junction compensation: CJC sensor attached to the

input terminals

INPUT SPECIFICATIONS

Minimum span: 3 mV

Input resistance: 20 kΩ min.

Burnout sensing: 0.1 μA

Lower temperature range & span (in °C)

(PR): Lower range 0 to 880°C; min. span 370°C

K (CA): Lower range -270 to +1200°C; min. span 75°C

E (CRC): Lower range -270 to +750°C; min. span 50°C

J (IC): Lower range -210 to +800°C; min. span 60°C

T (CC): Lower range -270 to +325°C; min. span 75°C

B (RH): Lower range 0 to 750°C; min. span 780°C

R: Lower range -50 to +550°C; min. span 360°C

S: Lower range -50 to +550°C; min. span 380°C

N: Lower range -270 to +1100°C; min. span 110°C

Lower temperature range & span (in °F)

(PR): Lower range 32 to 1616°F; min. span 670°F

K (CA): Lower range -454 to +2192°F; min. span 140°F

E (CRC): Lower range -454 to +1382°F; min. span 90°F

J (IC): Lower range -346 to +1472°F; min. span 110°F

T (CC): Lower range -454 to +617°F; min. span 140°F

B (RH): Lower range 32 to 1382°F; min. span 1450°F

R: Lower range -58 to +1022°F; min. span 680°F

S: Lower range -58 to +1022°F; min. span 700°F

N: Lower range -454 to +2012°F; min. span 200°F

Remark: The described accuracy may be partially not

satisfied when the temperature ranges below 0°C. Consult

factory.

OUTPUT SPECIFICATIONS

■ DC Current: 0 – 20 mA DC

Minimum span: 1 mA

Offset: Max. 1.5 times span

Load resistance: Output drive 11 V max.

■ DC Voltage: -10 – +12 V DC

Spans: Min. 5 mV, max. 20 V

Offset: Max. 1.5 times span

Load resistance: Output drive 10 mA max.; 5 mA for

negative voltage output; at ≥ 0.5 V

INSTALLATION

Power Consumption

•AC:

Approx. 4 VA at 100 V

Approx. 5 VA at 200 V

Approx. 6 VA at 264 V

•DC: Approx. 3 W

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 0 to 90 %RH (non-condensing)

Mounting: DIN rail

Weight: 130 g (0.29 lb)

PERFORMANCE in percentage of span

Accuracy (whichever is greater)

K, E, J: ±0.1 % of FS or ±0.2°C (±0.36°F)

T, N: ±0.2 % of FS or ±0.2°C (±0.36°F)

PR, B, R, S: ±0.3 % of FS

(at over 400°C for R, S and PR; over 770°C for B)

Cold junction compensation error

(at 20°C ±10°C or 68°F ±18°F)

K, E, J, T, N: ±0.5°C or ±0.9°F

S, R, PR: ±1°C or ±1.8°F

Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)

(at over 400°C or 750°F for R, S and PR; over 770°C or

1420°F for B)

Burnout response: ≤ 10 sec.

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength:

2000 V AC @1 minute (input to output 1 or output 2 to

power to ground)

1000 V AC @1 minute (output 1 to output 2)