MODEL: W5VS

W5VS SPECIFICATIONS

ES-8513 Rev.12 Page 1/3

http://www.m-system.co.jp/

Terminal Block Dual Output Signal Conditioners W5-UNIT

SIGNAL TRANSMITTER

Functions & Features

• Converts a DC input into two isolated outputs

• Two independent output ranges

• Four-way isolation (input to output 1 to output 2 to power)

• Fast response type available

• High-density mounting

45 (1.77)

97

(3.82)

41 (1.61)

mm (inch)

MODEL: W5VS-[1][2][3]-[4][5]

ORDERING INFORMATION

Specify a code from below for each [1] through [5].

• Code number: W5VS-[1][2][3]-[4][5]

(e.g. W5VS-6A6-R/K/Q)

• Special input and output ranges (For codes Z, 0, 01 & 02)

• Specify the specification for option code /Q

(e.g. /C01/V01/S01)

[1] INPUT

Current

A: 4 – 20 mA DC (Input resistance 249 Ω)

B: 2 – 10 mA DC (Input resistance 499 Ω)

C: 1 – 5 mA DC (Input resistance 1000 Ω)

D: 0 – 20 mA DC (Input resistance 49.9 Ω)

E: 0 – 16 mA DC (Input resistance 61.9 Ω)

F: 0 – 10 mA DC (Input resistance 100 Ω)

G: 0 – 1 mA DC (Input resistance 1000 Ω)

H: 10 – 50 mA DC (Input resistance 20 Ω)

Z: Specify current (See INPUT SPECIFICATIONS)

Voltage

16: 0 – 60 mV DC (Input resistance 1 MΩ min.)

3: 0 – 1 V DC (Input resistance 1 MΩ min.)

4: 0 – 10 V DC (Input resistance 1 MΩ min.)

5: 0 – 5 V DC (Input resistance 1 MΩ min.)

6: 1 – 5 V DC (Input resistance 1 MΩ min.)

4W: -10 – +10 V DC (Input resistance 1 MΩ min.)

5W: -5 – +5 V DC (Input resistance 1 MΩ min.)

0: Specify voltage (See INPUT SPECIFICATIONS)

(CE not available. Power suffix code M, R2, P only.)

01: Specify voltage (See INPUT SPECIFICATIONS)

(Choose 01 for CE. Power suffix code R only.)

02: Specify voltage (See INPUT SPECIFICATIONS)

(CE not available. Power suffix code M, R2, P only.)

[2] OUTPUT 1

Current

A: 4 – 20 mA DC (Load resistance 550 Ω max.)

B: 2 – 10 mA DC (Load resistance 1100 Ω max.)

C: 1 – 5 mA DC (Load resistance 2200 Ω max.)

D: 0 – 20 mA DC (Load resistance 550 Ω max.)

E: 0 – 16 mA DC (Load resistance 685 Ω max.)

F: 0 – 10 mA DC (Load resistance 1100 Ω max.)

G: 0 – 1 mA DC (Load resistance 11 kΩ max.)

Z: Specify current (See OUTPUT SPECIFICATIONS)

Voltage

1: 0 – 10 mV DC (Load resistance 10 kΩ min.)

2: 0 – 100 mV DC (Load resistance 100 kΩ min.)

3: 0 – 1 V DC (Load resistance 100 Ω min.)

4: 0 – 10 V DC (Load resistance 1000 Ω min.)

5: 0 – 5 V DC (Load resistance 500 Ω min.)

6: 1 – 5 V DC (Load resistance 500 Ω min.)

4W: -10 – +10 V DC (Load resistance 2000 Ω min.)

5W: -5 – +5 V DC (Load resistance 1000 Ω min.)

0: Specify voltage (See OUTPUT SPECIFICATIONS)

[3] OUTPUT 2

Same range availability as Output 1

Y: None

[4] POWER INPUT

AC Power

M: 85 – 264 V AC (Operational voltage range 85 – 264 V,

47 – 66 Hz)

(CE not available)

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

R2: 11 – 27 V DC

(Operational voltage range 11 – 27 V, ripple 10 %p-p max.)

(CE not available)

P: 110 V DC

(Operational voltage range 85 – 150 V, ripple 10 %p-p max.)

(CE not available)

[5] OPTIONS (multiple selections)

Response Time (0 – 90 %)

blank: Standard (≤ 0.5 sec.)

/K: Fast Response (Approx. 25 msec.)

Other Options

blank: none