MODEL: W5LCS

W5LCS SPECIFICATIONS

ES-8508 Rev.5 Page 1/3

http://www.m-system.co.jp/

Terminal Block Dual Output Signal Conditioners W5-UNIT

STRAIN GAUGE TRANSMITTER

Functions & Features

• Provides a DC output signal compatible with a bridge type

strain gauge utilized in load cells, pressure transducers

• Supplies required excitation voltage

• Excitation selectable among 2.5 V, 5 V and 10 V

• Wide-range adjustment: 0 – 60 % for zero, 100 – 40 % for

span

• High density mounting

45 (1.77)

97

(3.82)

41 (1.61)

mm (inch)

MODEL: W5LCS-[1][2][3][4]-[5][6]

ORDERING INFORMATION

• Code number: W5LCS-[1][2][3][4]-[5][6]

Specify a code from below for each [1] through [6].

(e.g. W5LCS-1224W5W-R2/K/Q)

• Special input and output ranges (For codes Z & 0)

• Specify the specification for option code /Q

(e.g. /C01/S01)

[1] INPUT STRAIN GAUGE

1: 1 mV/V

12: 1.25 mV/V

15: 1.5 mV/V

2: 2 mV/V

3: 3 mV/V

4: 4 mV/V

5: 5 mV/V

6: 10 mV/V

7: 20 mV/V

0: Specify

[2] EXCITATION

1: 2.5 V

2: 5 V

3: 10 V

0: Specify

[3] OUTPUT 1

Current

A: 4 – 20 mA DC (Load resistance 550 Ω max.)

B: 2 – 10 mA DC (Load resistance 1100 Ω max.)

C: 1 – 5 mA DC (Load resistance 2200 Ω max.)

D: 0 – 20 mA DC (Load resistance 550 Ω max.)

E: 0 – 16 mA DC (Load resistance 685 Ω max.)

F: 0 – 10 mA DC (Load resistance 1100 Ω max.)

G: 0 – 1 mA DC (Load resistance 11 kΩ max.)

Z: Specify current (See OUTPUT SPECIFICATIONS)

Voltage

1: 0 – 10 mV DC (Load resistance 10 kΩ min.)

2: 0 – 100 mV DC (Load resistance 100 kΩ min.)

3: 0 – 1 V DC (Load resistance 100 Ω min.)

4: 0 – 10 V DC (Load resistance 1000 Ω min.)

5: 0 – 5 V DC (Load resistance 500 Ω min.)

6: 1 – 5 V DC (Load resistance 500 Ω min.)

4W: -10 – +10 V DC (Load resistance 2000 Ω min.)

5W: -5 – +5 V DC (Load resistance 1000 Ω min.)

0: Specify voltage (See OUTPUT SPECIFICATIONS)

[4] OUTPUT 2

Same range availability as Output 1

Y: None

[5] POWER INPUT

AC Power

M: 85 – 264 V AC (Operational voltage range 85 – 264 V,

47 – 66 Hz)

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

R2: 11 – 27 V DC

(Operational voltage range 11 – 27 V, ripple 10 %p-p max.)

P: 110 V DC

(Operational voltage range 85 – 150 V, ripple 10 %p-p max.)

[6] OPTIONS (multiple selections)

Response Time (0 – 90 %)

blank: Standard (≤ 0.5 sec.)

/K: Fast Response (Approx. 25 msec.)

Other Options

blank: none

/Q: Option other than the above (specify the specification)

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating