MODEL: 10BXU

http://www.m-system.co.jp/

10BXU SPECIFICATIONS

ES-0896 Rev.1 Page 1/3

High-density Signal Conditioners 10-RACK

STANDARD RACK

(2 positions)

Functions & Features

• Standard rack for 10-RACK signal conditioners

• Line power supplied via the rear rack bus

MODEL: 10BXU–[1][2]

ORDERING INFORMATION

• Code number: 10BXU-[1][2]

Specify a code from below for each [1] and [2].

(e.g. 10BXU-K/Q)

• Specify the specification for option code /Q

(e.g. /C01)

[1] POWER SUPPLY UNIT

AC Power

K: 85 – 132 V AC

(Operational voltage range 85 – 132 V, 47 – 63 Hz)

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

[2] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

Power supply and signal conditioner side of the main PWB are not coated.

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

RELATED PRODUCTS

• Blank filler plate (model: P-101)

GENERAL SPECIFICATIONS

Construction: Metal plates assembly

Coating: Zn-Cr (black), alumetized steel

Capacity: 2 positions

Connection: M3.5 screw terminals (torque 0.8 N·m)

Screw terminal: Nickel-plated steel

Isolation: I/O to power to FG

INSTALLATION

Power input

•AC: 85 – 132 V, 47 – 63 Hz, 15 VA maximum

•DC: 24 V DC ±10 %, (ripple 10 % p-p max.)

Operating temperature: -5 to 55°C (23 to 131°F)

0 to 55°C (32 to 131°F) for AC power

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Angle bracket

Weight: Approx. 1 kg (2.21 lb)

PERFORMANCE

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 500 V AC @ 1 minute

(I/O to power to FG)