MODEL: WPT

WPT SPECIFICATIONS

ES-2238 Rev.8 Page 1/3

http://www.m-system.co.jp/

Dual Output Plug-in Signal Conditioners W-UNIT

PT TRANSMITTER

Functions & Features

• Converting an alternating voltage from a potential

(voltage) transformer into two standard process signals

• Minimum ripple

• True RMS sensing

• Isolation up to 2000 V AC

• LCD meter

• Highdensity mounting

Typical Applications

• Centralized monitoring and control of power line and

power supply voltage measured at switch boards

• Monitoring abnormal voltage drops for detecting overload

50

(1.97)

136

(5.35)

80

(3.15)

mm (inch)

MODEL: WPT–[1][2][3]-[4][5]

ORDERING INFORMATION

• Code number: WPT-[1][2][3]-[4][5]

Specify a code from below for each of [1] through [5].

(e.g. WPT-1AA-B/E/Q)

• Special output ranges (For codes Z & 0)

• Specify the specification for option code /Q

(e.g. /C01/S01)

Note: When the user requires a current and a voltage

output, specify the current to be the Output 1 which allows

a greater load.

[1] INPUT

Voltage

1: 0 – 110 V AC

2: 0 – 220 V AC

5: 0 – 150 V AC

6: 0 - 300 V AC

[2] OUTPUT 1

Current

A: 4 – 20 mA DC (Load resistance 600 Ω max.)

B: 2 – 10 mA DC (Load resistance 1200 Ω max.)

C: 1 – 5 mA DC (Load resistance 2400 Ω max.)

D: 0 – 20 mA DC (Load resistance 600 Ω max.)

E: 0 – 16 mA DC (Load resistance 750 Ω max.)

F: 0 – 10 mA DC (Load resistance 1200 Ω max.)

G: 0 – 1 mA DC (Load resistance 12 kΩ max.)

Z: Specify current (See OUTPUT SPECIFICATIONS)

Voltage

1: 0 – 10 mV DC (Load resistance 10 kΩ min.)

2: 0 – 100 mV DC (Load resistance 100 kΩ min.)

3: 0 – 1 V DC (Load resistance 1000 Ω min.)

4: 0 – 10 V DC (Load resistance 10 kΩ min.)

5: 0 – 5 V DC (Load resistance 5000 Ω min.)

6: 1 – 5 V DC (Load resistance 5000 Ω min.)

4W: -10 – +10 V DC (Load resistance 10 kΩ min.)

5W: -5 – +5 V DC (Load resistance 5000 Ω min.)

0: Specify voltage (See OUTPUT SPECIFICATIONS)

[3] OUTPUT 2

Current

A: 4 – 20 mA DC (Load resistance 350 Ω max.)

B: 2 – 10 mA DC (Load resistance 700 Ω max.)

C: 1 – 5 mA DC (Load resistance 1400 Ω max.)

D: 0 – 20 mA DC (Load resistance 350 Ω max.)

E: 0 – 16 mA DC(Load resistance 430 Ω max.)

F: 0 – 10 mA DC (Load resistance 700 Ω max.)

G: 0 – 1 mA DC (Load resistance 7000 Ω max.)

Z: Specify current (See OUTPUT SPECIFICATIONS)

Voltage

Same range availability as Output 1

[4] POWER INPUT

AC Power

B: 100 V AC

C: 110 V AC

D: 115 V AC

F: 120 V AC

G: 200 V AC

H: 220 V AC

J: 240 V AC

DC Power

S: 12 V DC

R: 24 V DC

V: 48 V DC

P: 110 V DC