MODEL: W5TS

W5TS SPECIFICATIONS

ES-8512 Rev.8 Page 1/4

http://www.m-system.co.jp/

Terminal Block Dual Output Signal Conditioners W5-UNIT

THERMOCOUPLE TRANSMITTER

Functions & Features

• Accepts direct input from a thermocouple

• Two independent output ranges

• Linearization and burnout

• Cold junction compensation

• Fast response type available

• High-density mounting

45 (1.77)

97

(3.82)

mm (inch)

41 (1.61)

MODEL: W5TS-[1][2][3]-[4][5]

ORDERING INFORMATION

• Code number: W5TS-[1][2][3]-[4][5]

Specify a code from below for each [1] through [5].

(e.g. W5TS-2A6-R/K/BL/Q)

• Temperature range (e.g. 0 – 800°C)

• Special output ranges (For codes Z & 0)

• Specify the specification for option code /Q

(e.g. /C01/V01/S01)

[1] INPUT THERMOCOUPLE

1: (PR) (Usable Range 0 to 1760°C, 32 to 3200°F)

2: K (CA) (Usable range -270 to +1370°C, -454 to +2498°F)

3: E (CRC) (Usable range -270 to +1000°C, -454 to +1832°F)

4: J (IC) (Usable range -210 to +1200°C, -346 to +2192°F)

5: T (CC) (Usable range -270 to +400°C, -454 to +752°F)

6: B (RH) (Usable range 0 to 1820°C, 32 to 3308°F)

7: R (Usable range -50 to +1760°C, -58 to +3200°F)

8: S (Usable range -50 to +1760°C, -58 to +3200°F)

N: N (Usable range -270 to +1300°C, -454 to +2372°F)

0: Specify

[2] OUTPUT 1

Current

A: 4 – 20 mA DC (Load resistance 550 Ω max.)

B: 2 – 10 mA DC (Load resistance 1100 Ω max.)

C: 1 – 5 mA DC (Load resistance 2200 Ω max.)

D: 0 – 20 mA DC (Load resistance 550 Ω max.)

E: 0 – 16 mA DC (Load resistance 685 Ω max.)

F: 0 – 10 mA DC (Load resistance 1100 Ω max.)

G: 0 – 1 mA DC (Load resistance 11 kΩ max.)

Z: Specify current (See OUTPUT SPECIFICATIONS)

Voltage

1: 0 – 10 mV DC (Load resistance 10 kΩ min.)

2: 0 – 100 mV DC (Load resistance 100 kΩ min.)

3: 0 – 1 V DC (Load resistance 100 Ω min.)

4: 0 – 10 V DC (Load resistance 1000 Ω min.)

5: 0 – 5 V DC (Load resistance 500 Ω min.)

6: 1 – 5 V DC (Load resistance 500 Ω min.)

0: Specify voltage (See OUTPUT SPECIFICATIONS)

[3] OUTPUT 2

Same range availability as Output 1

Y: None

[4] POWER INPUT

AC Power

M: 85 – 264 V AC (Operational voltage range 85 – 264 V,

47 – 66 Hz)

(CE not available)

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

R2: 11 – 27 V DC

(Operational voltage range 11 – 27 V, ripple 10 %p-p max.)

(CE not available)

P: 110 V DC

(Operational voltage range 85 – 150 V, ripple 10 %p-p max.)

(CE not available)

[5] OPTIONS (multiple selections)

Response Time (0 – 90 %)

blank: Standard (≤ 0.5 sec.)

/K: Fast Response (Approx. 25 msec.)

Burnout

blank: Upscale burnout

/BL: Downscale burnout

/BN: No burnout

Other Options

blank: none

/Q: Option other than the above (specify the specification)

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

ADJUSTMENT

/V01: Multi-turn fine adjustment