MODEL: M2AVS

M2AVS SPECIFICATIONS

ES-5041 Rev.11 Page 1/4

http://www.m-system.co.jp/

Super-mini Signal Conditioners Mini-M Series

DC ALARM

Functions & Features

• Provides N.O. relay outputs at preset DC input levels

• Dual trip

• Multi-turn potentiometer adj.

• Monitor jacks help setpoint adj.

• Power ON timer

• Relays can be powered 110 V DC

Typical Applications

• Annunciator

• Various alarm applications

Model

M2AVS

23 (.91)

76

(2.99)

124

(4.88)

mm (inch)

MODEL: M2AVS–[1][2][3][4]–[5][6]

ORDERING INFORMATION

• Code number: M2AVS-[1][2][3][4]-[5][6]

Specify a code from below for each of [1] through [6].

(e.g. M2AVS-6112-R/CE/Q)

• Special input range (For codes Z, 0 & 01)

• Specify the specification for option code /Q

(e.g. /C01/S01)

[1] INPUT

Current

A: 4 – 20 mA DC (Input resistance 250 Ω)

A1: 4 – 20 mA DC (Input resistance 50 Ω)

B: 2 – 10 mA DC (Input resistance 500 Ω)

C: 1 – 5 mA DC (Input resistance 1000 Ω)

D: 0 – 20 mA DC (Input resistance 50 Ω)

E: 0 – 16 mA DC (Input resistance 62.5 Ω)

F: 0 – 10 mA DC (Input resistance 100 Ω)

G: 0 – 1 mA DC (Input resistance 1000 Ω)

H: 10 – 50 mA DC (Input resistance 100 Ω)

J: 0 – 10 μA DC (Input resistance 1000 Ω)

K: 0 – 100 μA DC (Input resistance 1000 Ω)

GW: -1 – +1 mA DC (Input resistance 1000 Ω)

FW: -10 – +10 mA DC (Input resistance 100 Ω)

Z: Specify current (See INPUT SPECIFICATIONS)

Voltage

1: 0 – 10 mV DC (Input resistance 10 kΩ min.)

15: 0 – 50 mV DC (Input resistance 10 kΩ min.)

16: 0 – 60 mV DC (Input resistance 10 kΩ min.)

2: 0 – 100 mV DC (Input resistance 100 kΩ min.)

3: 0 – 1 V DC (Input resistance 1 MΩ min.)

4: 0 – 10 V DC (Input resistance 1 MΩ min.)

5: 0 – 5 V DC (Input resistance 1 MΩ min.)

6: 1 – 5 V DC (Input resistance 1 MΩ min.)

4W: -10 – +10 V DC (Input resistance 1 MΩ min.)

5W: -5 – +5 V DC (Input resistance 1 MΩ min.)

0: Specify voltage (See INPUT SPECIFICATIONS)

(Select ‘/N’ for ‘Standards & Approvals’ code.)

01: Specify voltage (See INPUT SPECIFICATIONS)

(Select ‘/CE’ for ‘Standards & Approvals’ code.)

[2] SETPOINT 1 OUTPUT

1: Hi (coil energized at alarm)

3: Lo (coil energized at alarm)

[3] SETPOINT 2 OUTPUT

1: Hi (coil energized at alarm)

3: Lo (coil energized at alarm)

[4] OUTPUT

2: Relay; N.O. or make contact

6: Photo MOSFET relay; N.O.

[5] POWER INPUT

AC Power

M: 85 – 264 V AC (Operational voltage range 85 – 264 V,

47 – 66 Hz)

(Select ‘/N’ for ‘Standards & Approvals’ code.)

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

R2: 11 – 27 V DC

(Operational voltage range 11 – 27 V, ripple 10 %p-p max.)

(Select ‘/N’ for ‘Standards & Approvals’ code.)

P: 110 V DC

(Operational voltage range 85 – 150 V, ripple 10 %p-p max.)

(Select ‘/N’ for ‘Standards & Approvals’ code.)

[6] OPTIONS (multiple selections)

Standards & Approvals (must be specified)

/N: Without CE

/CE: CE marking

Other Options

blank: none