MODEL: 15VF

15VF SPECIFICATIONS

ES-0622 Rev.1 Page 1/3

http://www.m-system.co.jp/

Dual Channel Input/Output Isolators 15-RACK

SIGNAL CONVERTER

(high speed response)

Functions & Features

• Converting a DC input into a standard process signal

• 2 channels available; accomplishing economical and

space-saving multi-input processing

MODEL: 15VF–[1]6-R[2]

ORDERING INFORMATION

• Code number: 15VF-[1]6-R[2]

Specify a code from below for each [1] and [2].

(e.g. 15VF-46-R/Q)

• Special input range (For code 0)

• Specify the specification for option code /Q

(e.g. /C01)

[1] INPUT

Current

A: 4 – 20 mA DC (Input resistance 250 Ω)

D: 0 – 20 mA DC (Input resistance 50 Ω)

G: 0 – 1 mA DC (Input resistance 1000 Ω)

H: 10 – 50 mA DC (Input resistance 100 Ω)

Voltage

3: 0 – 1 V DC (Input resistance 1 MΩ min.)

4: 0 – 10 V DC (Input resistance 1 MΩ min.)

5: 0 – 5 V DC (Input resistance 1 MΩ min.)

6: 1 – 5 V DC (Input resistance 1 MΩ min.)

0: Specify voltage (See INPUT SPECIFICATIONS)

OUTPUT

Voltage

6: 1 – 5 V DC (Load resistance 5000 Ω min.)

POWER INPUT

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

[2] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

RELATED PRODUCTS

• EXTENDER CARD (model:10EC)

Necessary to adjust span.

GENERAL SPECIFICATIONS

Construction: Rack-mounted; terminal access via screw

terminals at the front and via card-edge connector at the

rear; terminal cover provided

Connection

Input: M3.5 screw terminals (torque 0.8 N·m)

Output: Card-edge connector and M3.5 screw terminals

(torque 0.8 N·m)

Power input: Supplied from card-edge connector

Screw terminal: Nickel-plated steel

Housing material: Flame-resistant resin (black)

Isolation: Input to output or power; ch.1 input to ch.2 input

Overrange output: Approx. -10 to +120 %

Zero adjustment: -5 to +5 % (front)

Span adjustment: 95 to 105 % (top)

INPUT SPECIFICATIONS

■ DC Current: Input resistor incorporated

•DC Voltage: 0 – 30 V DC

Minimum span: 1 V

Offset: Max. 1.5 times span

Input resistance: ≥ 1 MΩ

OUTPUT SPECIFICATIONS

With the input voltage code 3, 4, 5, 6 and current, the

output goes below 0 % when the input is open.