MODEL: 17MS

http://www.m-system.co.jp/

17MS SPECIFICATIONS

ES-2916 Rev.0 Page 1/2

Rack-mounted Power Transducers 17-RACK

POTENTIOMETER CONVERTER

Functions & Features

• Providing a DC output proportional to a potentiometer or

slidewire position input

• 50 % zero/span adjustments with minimal interaction

Typical Applications

• Tank levels

• Positions

MODEL: 17MS–6–R

ORDERING INFORMATION

• Code number: 17MS-6-R

INPUT POTENTIOMETER

Total resistance 100 Ω – 10 kΩ

OUTPUT

Voltage

6: 1 – 5 V DC (Load resistance 2000 Ω min.)

POWER INPUT

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

GENERAL SPECIFICATIONS

Construction: Rack-mounted; terminal access via screw

terminals on the front and connector on the rear; terminal

cover provided

Connection:

Input: M3.5 screw terminals (torque 0.8 N·m)

Output: Connector

Power input: Supplied from connector

Screw terminal: Nickel-plated steel

Isolation: Input to output to power

Zero adjustment: 0 – 50 % of total resistance (front)

Span adjustment: 50 – 100 % of total resistance (front)

INPUT SPECIFICATIONS

Minimum span: 50 % of total resistance

Excitation: Approx. 0.2 V DC

INSTALLATION

Current consumption: Approx. 35 mA

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 40 to 85 % RH (non-condensing)

Mounting: Standard Rack 17BXE

Weight: 150 g (0.33 lb)

PERFORMANCE in percentage of span

Accuracy: ±0.3 %

Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)

Response time: ≤ 0.5 sec. (0 – 90 %)

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 1500 V AC @ 1 minute

(input to output or power)

500 V AC @ 1 minute (outut to power)

1500 V AC @ 1 minute (input or output or power to ground)