MODEL: 17PE

http://www.m-system.co.jp/

17PE SPECIFICATIONS

ES-2938 Rev.0 Page 1/2

Rack-mounted Power Transducers 17-RACK

PT TRANSMITTER

Functions & Features

• Converting an alternating voltage from a potential

(voltage) transformer into a standard process signal

• Minimum ripple

Typical Applications

• Centralized monitoring and control of power line and

power supply voltage measured at switch boards

• Monitoring abnormal voltage drops for detecting overload

MODEL: 17PE–[1]6-R

ORDERING INFORMATION

• Code number: 17PE-[1]6-R

Specify a code from below for [1].

(e.g. 17PE-56-R)

[1] INPUT

Voltage

1: 0 – 110 V AC

2: 0 – 220 V AC

5: 0 – 150 V AC

6: 0 - 300 V AC

OUTPUT

Voltage

6: 1 – 5 V DC (Load resistance 2000 Ω min.)

AUXILIARY POWER SUPPLY

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

GENERAL SPECIFICATIONS

Construction: Rack-mounted; terminal access via screw

terminals on the front and connector on the rear; terminal

cover provided

Connection

Input: M3.5 screw terminals (torque 0.8 N·m)

Output: Connector

Auxiliary power: Supplied from connector

Screw terminal: Nickel-plated steel

Isolation: Input to output to auxiliary power

Input waveform: Up to 15 % of 3rd harmonic content

Overrange output: 0 to 120 %

Zero adjustment: -5 to +5 % (front)

Span adjustment: 95 to 105 % (front)

INPUT SPECIFICATIONS

Frequency: 50 or 60 Hz

Input burden: 0.5 VA

Overload capacity: 200 % of rating for 10 sec., 120 %

continuous

Operational range: 0 – 120 % of rating

OUTPUT SPECIFICATIONS

150

300V

0

• Operation Diagram (example)

5V

OUT

IN

3

1

INSTALLATION

Auxiliary power supply

Current consumption: Approx. 35 mA

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 40 to 85 % RH (non-condensing)

Mounting: Standard Rack 17BXE

Weight: 150 g (0.33 lb)

PERFORMANCE in percentage of span

Accuracy: ±0.4 % (at 23°C ±10°C or 73.4°F ±18°F, 45 – 65

Hz)

Response time: ≤ 1 sec. (0 – 100 % ±1 %)

Ripple: 1 %p-p max.

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 500 V AC @ 1 minute (output to

auxiliary power)