MODEL: W2TS

W2TS SPECIFICATIONS

ES-5512 Rev.15 Page 1/5

http://www.m-system.co.jp/

Space-saving Dual Output Signal Conditioners

Mini-MW Series

THERMOCOUPLE TRANSMITTER

Functions & Features

• Accepts direct input from a thermocouple and provides a

standard process signal

• 5-segment linearization

• Burnout

• High-accuracy cold junction compensation

• Fast response type available

Typical Applications

• High-accuracy cold junction compensation benefits

narrow span measurements

• 0.1 μA burnout sensing enables long distance

transmission with minimum offset drifts

• Electric furnace (isolation ensured even when

200 V AC power for heater leaks through furnace

wall)

• No burnout type can connect to a single T/C in

parallel with a recorder

Model

SPAN

ZERO

SPAN

ZERO

88.5

(3.48)

29.5 (1.16)

124

(4.88)

mm (inch)

MODEL: W2TS–[1][2][3]-[4][5]

ORDERING INFORMATION

• Code number: W2TS-[1][2][3]-[4][5]

Specify a code from below for each [1] through [5].

(e.g. W2TS-2A6-M2/BL/CE/Q)

• Temperature range (e.g. 0 – 800°C)

• Special output ranges (For codes Z & 0)

• Specify the specification for option code /Q

(e.g. /C01/V01)

Note: If one of the outputs should be a current range,

specify it for the Output 1 to allow a greater load.

[1] INPUT THERMOCOUPLE

1: (PR) (Usable Range 0 to 1760°C, 32 to 3200°F)

2: K (CA) (Usable range -270 to +1370°C, -454 to +2498°F)

3: E (CRC) (Usable range -270 to +1000°C, -454 to +1832°F)

4: J (IC) (Usable range -210 to +1200°C, -346 to +2192°F)

5: T (CC) (Usable range -270 to +400°C, -454 to +752°F)

6: B (RH) (Usable range 0 to 1820°C, 32 to 3308°F)

7: R (Usable range -50 to +1760°C, -58 to +3200°F)

8: S (Usable range -50 to +1760°C, -58 to +3200°F)

N: N (Usable range -270 to +1300°C, -454 to +2372°F)

0: Specify

[2] OUTPUT 1

Current

A: 4 – 20 mA DC (Load resistance 750 Ω max.)

B: 2 – 10 mA DC (Load resistance 1500 Ω max.)

C: 1 – 5 mA DC (Load resistance 3000 Ω max.)

D: 0 – 20 mA DC (Load resistance 750 Ω max.)

E: 0 – 16 mA DC (Load resistance 900 Ω max.)

F: 0 – 10 mA DC (Load resistance 1500 Ω max.)

G: 0 – 1 mA DC (Load resistance 15 kΩ max.)

Z: Specify current (See OUTPUT SPECIFICATIONS)

Voltage

1: 0 – 10 mV DC (Load resistance 10 kΩ min.)

2: 0 – 100 mV DC (Load resistance 100 kΩ min.)

3: 0 – 1 V DC (Load resistance 1000 Ω min.)

4: 0 – 10 V DC (Load resistance 10 kΩ min.)

5: 0 – 5 V DC (Load resistance 5000 Ω min.)

6: 1 – 5 V DC (Load resistance 5000 Ω min.)

0: Specify voltage (See OUTPUT SPECIFICATIONS)

[3] OUTPUT 2

Y: None

Current

A: 4 – 20 mA DC (Load resistance 350 Ω max.)

B: 2 – 10 mA DC (Load resistance 700 Ω max.)

C: 1 – 5 mA DC (Load resistance 1400 Ω max.)

D: 0 – 20 mA DC (Load resistance 350 Ω max.)

E: 0 – 16 mA DC(Load resistance 430 Ω max.)

F: 0 – 10 mA DC (Load resistance 700 Ω max.)

G: 0 – 1 mA DC (Load resistance 7000 Ω max.)

Z: Specify current (See OUTPUT SPECIFICATIONS)

Voltage

Same range availability as Output 1