MODEL: 18BXCS

http://www.m-system.co.jp/

18BXCS SPECIFICATIONS

ES-1807 Rev.7 Page 1/4

Rack-mounted DCS Signal Conditioners 18-RACK

STANDARD RACK

(with grounding bar)

Functions & Features

• Standard 19" rack for 18-RACK signal conditioners

• Line power supplied via the rear rack bus

• Grounding bar

• Direct interface to various DCS with the rack connector

MODEL: 18BXCS–1[1]

ORDERING INFORMATION

• Code number: 18BXCS-1[1]

Specify a code from below for [1]

(e.g. 18BXCS-1Y3)

FUNCTION

1: Power distribution & grounding

[1] CONNECTOR

U1: Fujitsu FCN type I/O connector

Y1: Yokogawa DCS VMx / PM1 card use

Y3: Yokogawa DCS MAC2 / PAC card use

M-System guarantees the connecting section.

RELATED PRODUCTS

• Blank filler plate (model: P-181)

• Connector terminal block (model: CNT)

• Special cable with 40-pin connector (model: FCN)

GENERAL SPECIFICATIONS

Construction: Metal plates assembly

Coating: Colored Zn-Cr

Capacity: 16 positions

Connection

Power input: M4 screw terminals (torque 0.8 N·m)

Ground: M3.5 screw terminals (torque 0.8 N·m)

Shield: M3.5 screw terminals (torque 0.8 N·m)

Screw terminal

• Power input: Nickel-plated brass

• Ground: Chromated steel

• Shield: Chromated steel

INSTALLATION

Power input

•DC: Operating voltage range 24 V DC ±10 %, 2.5 A

minimum (ripple 10 % p-p max.)

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: JIS or EIA standard rack

Weight: 3 kg (6.61 lbs)

PERFORMANCE

Insulation resistance: ≥ 100 MΩ with 500 V DC

(I/O connector to power to FG)

Dielectric strength:

500 V AC @ 1 minute (I/O connector to power)

1000 V AC @ 1 minute (I/O connector or power to FG)