MODEL: 18DO

18DO SPECIFICATIONS

ES-1886 Rev.2 Page 1/3

http://www.m-system.co.jp/

Rack-mounted DCS Signal Conditioners 18-RACK

CONTACT OUTPUT MODULE

Functions & Features

• Buffer relay for providing signals from a DCS system

MODEL: 18DO–1–R

ORDERING INFORMATION

• Code number: 18DO-1-R

INPUT

Dry contact or open collector

OUTPUT

Relay contact

POWER INPUT

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

GENERAL SPECIFICATIONS

Construction: Rack-mounted; terminal access via screw

terminals on the front and connector on the rear; terminal

cover provided

Connection

Input: Connector

Output: M3.5 screw terminals (torque 0.8 N·m)

Power input: Supplied from connector

Screw terminal: Nickel-plated steel

Isolation: Input or power to output

Indicator LED: Red LED turns on when the coil is energized.

Test switch

AUTO: Relay energized at ON input

OFF: Forced relay de-energized

ON: Forced relay energized

INPUT SPECIFICATIONS

■ Input: Dry contact or open collector

Sensing: 24 V DC @ 20 mA

OUTPUT SPECIFICATIONS

■ Output: SPDT relay

Rating: 120 V AC @ 1 A (cos ø = 1)

30 V DC @ 1A (resistive load)

Maximum switching voltage: 264 V AC or 100 V DC

Maximum switching power: 120 VA or 30 W

Minimum load: 5 V DC @ 10 mA

For maximum relay life with inductive

loads, external protection is recommended.

INSTALLATION

Current consumption: Approx. 20 mA

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Standard Rack 18BXx or 18KBXx

Weight: 150 g (0.33 lb)

PERFORMANCE

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 1500 V AC @ 1 minute

(input or power to output to ground)