MODEL: 18BXEA

http://www.m-system.co.jp/

18BXEA SPECIFICATIONS

ES-1808 Rev.2 Page 2/6

Minimum load: 5 V DC @ 10 mA

INSTALLATION

Supply pressure: Refer to the data sheet for I/P transducers

Power consumption

•AC: 130 VA min.

•DC: 2.5 A min.

Operating temperature: -5 to +55°C (23 to 131°F) 0 to 50°C

(32 to 122°F) for AC power

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: JIS or EIA standard rack or surface

Weight

Single power supply w/o power units:

5.5 kg (12.13 lb) with DC power type

6.0 kg (13.23 lb) with AC power type

Dual-redundant or two independent power sources:

6.0 kg (13.23 lb) with AC/DC power type

6.5 kg (14.33 lb) with AC/AC power type

PERFORMANCE

Insulation resistance: ≥ 100 MΩ with 500 V DC

(I/O connector to power to FG)

Dielectric strength: 500 V AC @ 1 minute

(I/O connector to power)

1500 V AC @ 1 minute (power to FG)

500 V AC @ 1 minute (1000 V for 24 V DC)

(I/O connector to FG)

Maximum supply pressure: 196 kPa

MOUNTING REQUIREMENTS

450 (17.72)

465 (18.31)

4–M5 SCREW

ANGLE BRACKET

Observe an appropriate wiring space over and below.

*100 (3.94) for JIS standard