MODEL: 5VS

http://www.m-system.co.jp/

5VS SPECIFICATIONS

ES-2318 Rev.8 Page 1/2

Dual Channel Input/Output Isolators 5-UNIT

ISOLATOR

Functions & Features

• Accetping standard and non-standard process signals and

providing an isolated 1 – 5 V DC

• 2 channels available on the common output and power

negative

• Economical and space-saving multi-input processing

26 (1.02)

113

(4.45)

mm (inch)

148

(5.83)

MODEL: 5VS–[1]6-R

ORDERING INFORMATION

• Code number: 5VS-[1]6-R

Specify a code from below for [1].

(e.g. 5VS-66-R)

•Special input range (For code 0)

[1] INPUT

Voltage

1: 0 – 10 mV DC (Input resistance 10 kΩ min.)

2: 0 – 100 mV DC (Input resistance 100 kΩ min.)

3: 0 – 1 V DC (Input resistance 1 MΩ min.)

4: 0 – 10 V DC (Input resistance 1 MΩ min.)

5: 0 – 5 V DC (Input resistance 1 MΩ min.)

6: 1 – 5 V DC (Input resistance 1 MΩ min.)

0: Specify voltage (See INPUT SPECIFICATIONS)

( 0 % input must be 0 V.)

OUTPUT

Voltage

6: 1 – 5 V DC (Load resistance 10 kΩ min.)

POWER INPUT

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

GENERAL SPECIFICATIONS

Construction: Plug-in

Connection: M3.5 screw terminals (torque 0.8 N·m)

Screw terminal: Nickel-plated steel

Isolation: Input to output or power; ch.1 input to ch.2 input

Housing material: Flame-resistant resin (black)

Zero adjustment: -5 to +5 % (front)

Span adjustment: 95 to 105 % (front)

INPUT SPECIFICATIONS

■ INPUT

•DC Voltage: 0 – 300 V DC

Minimum span: 3 mV

Input resistance:

(Input Span: Input Resistance)

3 – 10 mV : 10 k (Ω minimum)

10 – 100 mV : 10 k

0.1 – 1V : 100 k

≥ 1 V : 1 M

INSTALLATION

Current consumption: 15 mA max.

Operating temperature: -5 to +60°C (23 to 140°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Surface or DIN rail; Standard Rack Mounting

Frame BX-16H available

Weight: 200 g (0.44 lb)

PERFORMANCE in percentage of span

Accuracy: ±0.1 %

Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)

Response time: ≤ 0.5 sec. (0 – 90 %)

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 500 V AC @ 1 minute (ch.1 input to ch.2

input to output or power)

1500 V AC @1 minute (ch.1 input or ch.2 input or output or

power to ground)