MODEL: 40DT

40DT SPECIFICATIONS

ES-9535 Rev.10 Page 1/6

https://www.m-system.co.jp/

Digital Panel Meters 40 Series

THERMOCOUPLE INPUT DIGITAL PANEL METER

(4 digits, process meter)

Functions & Features

• 4 digit (±9999) panel meter

• HOLD functions

• High visible, 0.8" (20.3mm) high and bright LED

mm (inch)

96 (3.78)

48

(1.89)

96 (3.78)

MODEL: 40DT–T1–[1][2]

ORDERING INFORMATION

• Code number: 40DT–T1–[1][2]

Specify a code from below for each of [1] and [2].

(e.g. 40DT-T1-R/Q)

• Specify the specification for option code /Q

(e.g. /C01/SET)

INPUT

T1:

K (CA) (Usable range -150 to +1370°C, -238 to +2498°F)

J (IC) (Usable range -180 to +1000°C, -292 to +1832°F)

T (CC) (Usable range -170 to +400°C, -274 to +752°F)

R (Usable range 380 to 1760°C, 716 to 3200°F)

[1] POWER INPUT

AC Power

K3: 100 – 120V AC

(Operational voltage range 85 - 132 V, 47 - 66 Hz)

L3: 200 – 240V AC

(Operational voltage range 170 - 264 V, 47 - 66 Hz)

DC Power

R: 24 V DC

(Operational voltage range 24 V ±20 %, ripple 10 %p-p max.)

[2] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

Moving parts and indicators are not coated.

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

EX-FACTORY SETTING

/SET: Preset according to the Ordering Information Sheet

(No. ESU-9535)

GENERAL SPECIFICATIONS

Construction: Panel flush mounting

Connection: M3 screw terminals (torque 0.6 N·m)

Solderless terminal: Refer to the drawing at the end of the

section.

Recommended manufacturer: Japan Solderless Terminal

MFG.Co.Ltd, Nichifu Co.,ltd

Screw terminal: Nickel-plated steel

Housing material: Flame-resistant resin (gray)

Isolation: Input to power

Cold junction compensation: CJC sensor attached to the

input terminals

A/D conversion: Σ – Δ

Sampling rate: 10 times/sec. (100 msec.)

Averaging: None or moving average

Setting: (Front button)

• Input type

• Temperature unit

• Moving average

• Brightness

• Others

■Recommended solderless terminal

3.3 (.13) max

mm (inch)

DISPLAY

Display: 4 digits of 20.3 mm (0.8 inch) height, 7-segment,

red LED

Display range: -9999 to 9999

Minimum display/setting scale: 1°C or 1°F

Zero indication: Higher-digit zeros are suppressed.

Over-range indication:

'S.ERR' blinks surpassing the permissible range.

'B.ERR' blinks at burnout.

Engineering unit indication: Sticker label attached

DC, AC, mV, V, kV, μA, mA, A, kA, mW, W,

kW, var, kvar, Mvar, VA, Hz, Ω, kΩ, MΩ,