MODEL: 47NLDY

47NLDY SPECIFICATIONS

ES-9567 Rev.2 Page 2/4

https://www.m-system.co.jp/

N, kN, Pa, kPa, MPa, t, t/h, ℃, °F, %RH, J,

kJ, MJ, rpm, sec, min, pH, %, ppm, etc.

SUPPLY OUTPUT

(across the terminals 1 – 2)

Output voltage:

24 - 28 V DC max. with no load

18 V DC min. at 20 mA no load

Current rating: ≤ 22 mA DC

• Shortcircuit Protection

Current limited: 35 mA max.

Protected time duration: No limit

INPUT SPECIFICATIONS

■ DC Current: Input resistor incorporated

Usable range: 4.00 - 20.00 mA DC

(Conformance range: -20 - +120 % of usable range)

OUTPUT SPECIFICATIONS

■ Alarm Output: Photo MOSFET Relay

Rating: 26.4 V DC @ 100 mA (resistive load)

ON resistance: ≤ 5 Ω

INSTALLATION

Power consumption

•DC: 2.2 W max.

Operating temperature: -10 to +55°C (14 to 131°F)

Operating humidity: 10 to 90 %RH (non-condensing)

Mounting: Magnet or screw mounting

Weight: 85 g (3.0 oz)

PERFORMANCE

Accuracy

Display: ±0.1 % ± 1 digit

(Input within 1 - 100 % for square root extraction)

Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)

Response time: ≤ 0.5 sec.

(alarm output: 0 – 100 % at 90 % setpoint)

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 1500 V AC @ 1 minute (input to alarm

output to power to ground)

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

RoHS Directive