MODEL: 47NLNT

47NLNT SPECIFICATIONS

ES-9564 Rev.4 Page 1/5

https://www.m-system.co.jp/

Digital Panel Meters 47NL Series

LOOP POWERED DIGITAL PANEL METER

(4½ digit, LED display type, with terminal block)

Functions & Features

• 4 ½ digit loop powered digital panel meter

• No external power source needed

• Moving average function to suppress the display flickering

• Scaling, forced zero, low-end cutout

• Max. and Min. value display

• Dedicated terminal block for input

48.0

(1.89)

96.0 (3.78)

48.5 (1.91)*

Zro

Spn

D/P

Tch

Fnc

Min

Max

H

P

L

↓

Scale/

↑

Max/Min

Shift

Up

mm (inch)

* Panel thickness not included.

MODEL: 47NLNT-[1][2]

ORDERING INFORMATION

• Code number: 47NLNT-[1][2]

Specify a code from below for each of [1] and [2].

(e.g. 47NLNT-R/Q)

• Specify the specification for option code /Q

(e.g. /SET)

INPUT

Current

4 – 20 mA DC

[1] DISPLAY COLOR

R: Red

G: Green

[2] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q

EX-FACTORY SETTING

/SET: Preset according to the Ordering Information Sheet

(No. ESU-9564)

GENERAL SPECIFICATIONS

Construction: Panel mount type

Degree of protection: IP66; Applicable to the front of the

panel meter mounted according to the specified panel

cutout.

Connection: M3 screw terminals (torque 0.6 N·m)

Solderless terminal: Refer to the drawing at the end of the

section.

Recommended manufacturer: Japan Solderless Terminal

MFG.Co.Ltd, Nichifu Co.,ltd

Screw terminal: Nickel-plated steel

Housing material: Flame-resistant resin (gray)

Setting: (Front button)

• Scaled range

• Moving average

• Others

(Refer to the instruction manual for details)

Averaging: None or moving average

Lockout setting: Prohibiting certain operations; protecting

settings

■Recommended solderless terminal

3.3 (.13) max

mm (inch)

DISPLAY

Display: 16 mm (.63) high, 4 ½ digits, 7-segment LED

Display range: -19999 to 19999

Zero indication: Higher-digit zeros are suppressed.

Over-range indication: ‘-19999’ or ‘19999’ blinking for

display values out of the display range.

‘S.ERR’ and ‘Min’ or ‘Max’ blinking when the input signal is

out of the usable range.

Function indicators:

Zro, Spn, D/P, Tch, Fnc, Min, Max

Display mode status and operation status, ON or blink

(Display color is the same as display color code.)

Engineering unit indication: Sticker label attached

DC, AC, mV, V, kV, μA, mA, A, kA, mW, W,

kW, var, kvar, Mvar, VA, Hz, Ω, kΩ, MΩ,

cm, mm, m, m/sec, mm/min, cm/min, m/min,

N, kN, Pa, kPa, MPa, t, t/h, ℃, °F, %RH, J,

kJ, MJ, rpm, sec, min, pH, %, ppm, etc.