MODEL: 49AV2

49AV2 SPECIFICATIONS

ES-9333 Rev.9 Page 1/5

http://www.m-system.co.jp/

Bargraph Indicators 49 Series

BARGRAPH INDICATING ALARM

Functions & Features

• Bargraph and digital displays

• DIN size

• Easy-to-read tri-color LED indicator

Typical Applications

• Indicator for various signals

• Available to use alarm with display

0

20

40

60

80

100

V

SET

MODE

M-SYSTEM

HH

H

L

LL

SPAN

POINT

ZERO

mm (inch)

117(4.61)

96

(3.78)

96(3.78)

MODEL: 49AV2-[1]W1[2]-[3]

ORDERING INFORMATION

• Code number: 49AV2-[1]W1[2]-[3]

Specify a code from below for each of [1] through [3].

(e.g. 49AV2-4W13-M)

• Special input range (For codes Z & 0)

• Digital meter scale (e.g. 0.0 – 150.0)

• Use Ordering Information Sheet (No. ESU-9333). Factory

setting will be used if not otherwise specified.

[1] ALARM OUTPUT

0: None

2: 2 points

4: 4 points

BAR LED COLOR

W: 3 colors (red, green, amber)

DIGITAL DISPLAY

1: With

[2] INPUT

Current

A: 4 – 20 mA DC (Input resistance 10 Ω)

D: 0 – 20 mA DC (Input resistance 10 Ω)

G: 0 – 1 mA DC (Input resistance 200 Ω)

Z: Specify current (See INPUT SPECIFICATIONS)

( 0 % input must be 0 mA.)

Voltage

3: 0 – 1 V DC (Input resistance 1 MΩ min.)

4: 0 – 10 V DC (Input resistance 1 MΩ min.)

5: 0 – 5 V DC (Input resistance 1 MΩ min.)

6: 1 – 5 V DC (Input resistance 1 MΩ min.)

0: Specify voltage (See INPUT SPECIFICATIONS)

( 0 % input must be 0 V.)

[3] POWER INPUT

AC Power

M: 85 – 264 V AC (Operational voltage range 85 – 264 V, 50/60 Hz

DC Power

R: 24 V DC

(Operational voltage range 24 V ±15 %, ripple 10 %p-p max.)

GENERAL SPECIFICATIONS

Construction: Panel flush mounting

Connection: M4 screw terminals

Housing material: ABS resin

Isolation: Input to alarm output to power

Zero adjustment: -10 to +10 % (front)

Span adjustment: 90 to 110 % (front)

Scale plate: Aluminium (white scale & characters on black

base)

H & L alarm output delay: 0 sec. (factory setting;

fieldselectable between 0 and 15 sec. by 1 sec. increments)

Setpoint adjustment

2 points:

H

[L setpoint ] to 100 %

L

0 to [H setpoint]

4 points:

HH

[H setpoint] to 100 %

H

[L setpoint] to [HH setpoint]

L

[LL setpoint] to [H setpoint]

LL 0 to [L setpoint]

Read rate: 12.5/s

Moving average sample number: 4 (factory setting; field

selectable among 1, 2, 4, 8 or 16)

■ BARGRAPH

LED: 51-segment LED

Scale length: 89 mm (3.50”) long, angle 120°

Display range: 0 to 100 (scaling function not available)

■ DIGITAL DISPLAYS

LED: 7-segment red LED, character 10 mm (.39”) high

Number of digits: 4 digits

Setting range: -1999 to 9999

(Min. 3 significant digits)