MODEL: 60F

60F SPECIFICATIONS

ES-6610 Rev.3 Page 1/4

http://www.m-system.co.jp/

Field Network Modules 60-UNIT Series

ANALOG I/O MODULE

(Fuji Electric T-Link use)

Functions & Features

• Interfacing analog I/O signals from/to 10-RACK or 18-RACK

modules with T-Link

• Saving power and I/O wiring inside an instrumentation

panel

72

(2.83)

80 (3.15)

mm (inch)

678

678

153 (6.02)

MODEL: 60F-16[1]-[2][3]

ORDERING INFORMATION

• Code number: 60F-16[1]-[2][3]

Specify a code from below for each [1] through [3].

(e.g. 60F-161-K/Q)

• Specify the specification for option code /Q

(e.g. /C01/S01)

NO. OF CHANNELS

16: 16 points

[1] I/O TYPE

1: Input

2: Output

[2] POWER INPUT

AC Power

K: 85 – 132 V AC

(Operational voltage range 85 – 132 V, 47 – 66 Hz)

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

[3] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

TERMINAL SCREW MATERIAL

/S01: Stainless steel

RELATED PRODUCTS

•Special cable (model: MCN34)

GENERAL SPECIFICATIONS

Construction: Plug-in

Connection

T-Link: Euro type connector terminal (applicable wire size:

I/O: 34-pin connector (OMRON XG4A-3434)

Power input: M3.5 screw terminal

Screw terminal: Chromated steel (standard) or stainless

steel

Housing material: Flame-resistant resin (black)

Isolation: I/O to T-Link to power to FG1

Power indicator: Green LED turns on with power supplied.

T-Link SPECIFICATIONS

Configuration: Multi-drop

Communication: Half-duplex

Baud rate: 500 kbps

Transmission media/distance:

Station No.: Rotary switch; 00 - 99

(Factory default setting: 00)

L RUN indicator: Red LED ON at normal communication

L ERR. indicator: Red LED ON/blinking at communication

abnormality

L I/O indicator: Red LED blinking at normal I/O

L COM indicator: RED LED blinking at T-Link normal

communication

■ NUMBER OF CONNECTABLE UNITS WITH T-Link

Up to a maximum of 32 T-Link devices can be connected in

a single T-Link system. There is a limit of 100 words in

processor memory. Make sure that the configured word

area to be occupied does not exceed the 100-word range.

(According to the Fuji Electric MICREX-F Users Manual)

It is necessary to consider these criteria when connecting to

this device.

The below describes the number of words occupied per

device by number of modules.

• For input 16 / output 16 modules: 16