MODEL: 60C

60C SPECIFICATIONS

ES-6602 Rev.10 Page 1/4

http://www.m-system.co.jp/

Field Network Modules 60-UNIT Series

ANALOG I/O MODULE

(CC-Link)

Functions & Features

• Interfacing analog I/O signals from/to 10-RACK or 18-RACK

modules with CC-Link

• Saving power and I/O wiring inside an instrumentation

panel

7 8 9

7 8 9

7 8 9

72

(2.83)

80

(3.15)

mm (inch)

153

(6.02)

MODEL: 60C-[1][2]-[3][4]

ORDERING INFORMATION

• Code number: 60C-[1][2]-[3][4]

Specify a code from below for each [1] through [4].

(e.g. 60C-161-K/Q)

• Specify the specification for option code /Q

(e.g. /C01/S01)

[1] NO. OF CHANNELS

04: 4 points

08: 8 points

16: 16 points

[2] I/O TYPE

1: Input

2: Output

[3] POWER INPUT

AC Power

K: 85 – 132 V AC

(Operational voltage range 85 – 132 V, 47 – 66 Hz)

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

[4] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

TERMINAL SCREW MATERIAL

/S01: Stainless steel

RELATED PRODUCTS

•Special cable (model: MCN34)

PACKAGE INCLUDES...

• Terminating resistor (110 Ω, 0.5 W)

GENERAL SPECIFICATIONS

Construction: Plug-in

Connection

CC-Link: Euro type connector terminal (applicable wire

I/O: 34-pin connector (OMRON XG4A-3434)

Power input: M3.5 screw terminal

Screw terminal: Chromated steel (standard) or stainless

steel

Housing material: Flame-resistant resin (black)

Isolation: I/O to CC-Link to power to FG1

Power indicator: Green LED turns on with power supplied.

CC-Link COMMUNICATION

CC-Link: Conforms to Version 1.10

Station type: Remote device station

Station No. setting: Rotary switch; 1 – 64

Number of occupied stations:

60C-04 1 station

60C-08 2 stations

60C-16 4 stations

Remote I/O (RX, RY) is fixed to 32 points.

Baud rate setting: Rotary switch

(156kbps(factory setting), 625kbps, 2.5Mbps, 5Mbps,

10Mbps)

Transmission cable: Approved for CC-Link

L RUN indicator: Red LED turns on in an normal condition.

L ERR. indicator: Red LED turns on or flashes in an

abnormality; off with wire breakdown.

SD indicator: Red LED turns on when transmitting.

RD indicator: Red LED turns on when receiving.