MODEL: 60D

60D SPECIFICATIONS

ES-6604 Rev.15 Page 1/4

https://www.m-system.co.jp/

Field Network Modules 60-UNIT Series

ANALOG I/O MODULE

(DeviceNet)

Functions & Features

• Interfacing analog I/O signals from/to 10-RACK or 18-RACK

modules with DeviceNet

• Saving power and I/O wiring inside an instrumentation

panel

72

(2.83)

80

(3.15)

mm (inch)

153

(6.02)

MODEL: 60D-[1][2]-[3][4]

ORDERING INFORMATION

• Code number: 60D-[1][2]-[3][4]

Specify a code from below for each of [1] through [4].

(e.g. 60D-161-K/Q)

• Specify the specification for option code /Q

(e.g. /C01/S01)

[1] NO. OF CHANNELS

04: 4 points

08: 8 points

16: 16 points

[2] I/O TYPE

1: Input

2: Output

[3] POWER INPUT

AC Power

K: 85 – 132 V AC

(Operational voltage range 85 – 132 V, 47 – 66 Hz)

(CE not available)

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

[4] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

TERMINAL SCREW MATERIAL

/S01: Stainless steel

RELATED PRODUCTS

•Special cable (model: MCN34)

• Programming Unit (model: PU-2x)

GENERAL SPECIFICATIONS

Construction: Plug-in

Connection

DeviceNet: Euro type connector terminal (applicable

I/O: 34-pin connector (OMRON XG4A-3434)

Power input: M3.5 screw terminal

Screw terminal: Chromated steel (standard) or stainless

steel

Housing material: Flame-resistant resin (black)

Isolation: I/O to DeviceNet to power to FG1

Power indicator: Green LED turns on with power supplied.

DeviceNet COMMUNICATION

Transmission cable: Approved for DeviceNet

Node address setting: DIP switch; 00 – 63

Baud rate setting: DIP switch

MS (Module Status) indicator: Bi-color (green/red) LED

indicates device status.

NS (Network Status) indicator: Bi-color (green/red)

LED indicates status of the communication link.

INPUT SPECIFICATIONS

■ Analog Input

Input range: 1 – 5 V DC

Input resistance: ≥ 1 MΩ

10-RACK and 18-RACK I/O modules must be isolated types.

Non-isolated modules such as 10BW and 18BW are not

usable.

A/D conversion output: 16-bit binary

Signal range 0 – 100 % is converted into hexadecimal 0000

– 1770 (0 – 6000). -15 to 0 % is represented by 2’s

complements.

Overall range is represented by hexadecimal FC7C – 1AF4