MODEL: 61D

61D SPECIFICATIONS

ES-6629 Rev.14 Page 2/4

https://www.m-system.co.jp/

Note: In the firmware version 3.00 or later, analog input

range 0 – 100% can be converted into hexadecimal 0000 –

2710 (0 – 10000).

In addition, negative values of analog input range -15 to 0%

can be converted into signed absolute values.

Refer to the instruction manual for details.

OUTPUT SPECIFICATIONS

■ Analog Output

Output range: 1 – 5 V DC

Load resistance: 20 kΩ minimum

(Output must be isolated with signal conditioners.

When the transmission line is open, the last value sampled

before failure is held. Non-isolated modules such as M2BW

and M8BW are not usable. )

D/A conversion output: 16-bit binary

Signal range 0 – 100 % is converted into hexadecimal

0000 – 1770 (0 – 6000). -15 to 0 % is represented by 2’s

complements.

Overall range is represented by hexadecimal FC7C – 1AF4

(-900 – +6900), for -15 – +115 %.

Note: In the firmware version 3.00 or later, analog output

range 0 – 100% can be converted into hexadecimal 0000 –

2710 (0 – 10000).

In addition, negative values of analog output range -15 to

0% can be converted into signed absolute values.

Refer to the instruction manual for details.

INSTALLATION

Power consumption

•AC: Approx. 4 VA

•DC: Approx. 4 W (160 mA)

Supply voltage to network: 11 – 25 V DC supplied through

the network terminal block

Supply current to network: 60 mA max. @ 24 V

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Atmosphere: No corrosive gas or heavy dust

Mounting: Installation Base (model: MxBS2)

Weight: 250 g (0.55 lb)

PERFORMANCE in percentage of span

A/D conversion: ±0.1 %

D/A conversion: ±0.1 %

Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)

Permissible power failure duration: ≤ 10 msec.

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 1500 V AC @ 1 minute

(I/O to DeviceNet to power)

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

RoHS Directive