MODEL: 61F

61F SPECIFICATIONS

ES-6635 Rev.2 Page 1/3

http://www.m-system.co.jp/

Field Network Modules 61-UNIT Series

ANALOG I/O MODULE

(Fuji Electric T-Link use)

Functions & Features

• Interfacing analog I/O signals from/to Mini-M or Pico-M

modules with T-LINK

• Saving power and I/O wiring inside an instrumentation

panel

mm (inch)

12

3

12

3

50

(1.97)

100

(3.94)

115 (4.53)

MODEL: 61F-[1][2]-[3][4]

ORDERING INFORMATION

• Code number: 61F-[1][2]-[3][4]

Specify a code from below for each [1] through [4].

(e.g. 61F-161-K/Q)

• Specify the specification for option code /Q

(e.g. /C01)

[1] NO. OF CHANNELS

04: 4 points

08: 8 points

16: 16 points

[2] I/O TYPE

1: Input

2: Output

[3] POWER INPUT

AC Power

K: 85 – 132 V AC

(Operational voltage range 85 – 132 V, 47 – 66 Hz)

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

(Specify power suffix code R (24 V DC) when the UNIT is to be

combined with the M8BS2.)

[4] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

RELATED PRODUCTS

• Installation Base (model: M2BS2)

• Installation Base (model: M8BS2)

GENERAL SPECIFICATIONS

Construction: Plug-in

Connection

T-Link: Euro type connector terminal (applicable wire

I/O: Via Installation Base (model: MxBS2)

Power input: Via Installation Base (model: MxBS2)

Housing material: Flame-resistant resin (black)

Isolation: I/O or T-Link to power

Power indicator: Green LED turns on with power supplied.

T-Link SPECIFICATIONS

Configuration: Multi-drop

Communication: Half-duplex

Baud rate: 500 kbps

Transmission media/distance:

Station No.: Rotary switch; 00 - 99

(Factory default setting: 00)

L RUN indicator: Red LED ON at normal communication

L ERR. indicator: Red LED ON/blinking at communication

abnormality

L I/O indicator: Red LED blinking at normal I/O

L COM indicator: RED LED blinking at T-Link normal

communication

■ NUMBER OF CONNECTABLE UNITS WITH T-LINK

Up to a maximum of 32 T-LINK devices can be connected in

a single T-LINK system. There is a limit of 100 words in

processor memory. Make sure that the configured word

area to be occupied does not exceed the 100-word range.

(According to the Fuji Electric MICREX-F Users Manual)

It is necessary to consider these criteria when connecting to

this device.

The below describes the number of words occupied per

device by number of modules.