MODEL: ANR

ANR SPECIFICATIONS

ES-2116 Rev.2 Page 1/4

http://www.m-system.co.jp/

Limit Alarms (potentiometer adj.) A-UNIT

ANGLE SENSOR ALARM

Functions & Features

• Providing SPDT relay outputs at preset voltage level

provided from Angle Sensor (model: NRA)

• Dual (Hi/Lo) trip

• Energized or de-energized coil at a tripped condition

selectable

• 50 % zero/span adjustments

• Hysteresis (deadband) adjustable

• Enclosed relays

• Relays can be powered 110 V DC

• High-density mounting

Typical Applications

• Annunciator

• Various alarm applications

50

(1.97)

136

(5.35)

80

(3.15)

mm (inch)

MODEL: ANR-[1]1[2][3]-[4]

ORDERING INFORMATION

• Code number: ANR-[1]1[2][3]-[4]

Specify a code from below for each of [1] through [4].

(e.g. ANR-1111-B)

[1] ACTION

1: Direct (output increases with input increase)

2: Reverse (output increases with input decrease)

[2] SETPOINT 1 OUTPUT

1: Hi (coil energized at alarm)

2: Hi (coil de-energized at alarm)

3: Lo (coil energized at alarm)

4: Lo (coil de-energized at alarm)

[3] SETPOINT 2 OUTPUT

1: Hi (coil energized at alarm)

2: Hi (coil de-energized at alarm)

3: Lo (coil energized at alarm)

4: Lo (coil de-energized at alarm)

[4] POWER INPUT

AC Power

B: 100 V AC

C: 110 V AC

D: 115 V AC

F: 120 V AC

G: 200 V AC

H: 220 V AC

J: 240 V AC

DC Power

S: 12 V DC

R: 24 V DC

V: 48 V DC

P: 110 V DC

RELATED PRODUCTS

• Brushless angle sensor (model: NRA)

GENERAL SPECIFICATIONS

Construction: Plug-in

Connection: M3.5 screw terminals

Housing material: Flame-resistant resin (black)

Isolation: Input to output 1 to output 2 to power

Zero adjustment: 0 – 50 % of linearity-assured range of the

angle sensor (front)

Span adjustment: 50 – 100 % of linearity-assured range of

the angle sensor (front)

Setpoint adjustments: 270°-turn screwdriver adjustments

(front); 0 – 100 % independently

Hysteresis (deadband) adjustments: 1 – 100 % (front)

LEDs: LED turns on at a tripped condition; red for output 1,

green for output 2 (located behind the front cover)

Power ON timer: Relays de-energized for approx. 2 seconds

after power is turned on.

INPUT SPECIFICATIONS

Input: 2 – 3 V DC (output from Angle Sensor)

Excitation: 5 V DC ±2 %