MODEL: 48V

http://www.m-system.co.jp/

48V SPECIFICATIONS

ES-9311 Rev.13 Page 2/5

Max. 3 charac. (48V-2, horizontal mount.)

If there is only one engineering unit with dual bargraph

type, the position and maximum number of characters

for single type are applied.

Bargraph: 101-segment LED, 100 mm (3.96”) long, 1.5 mm

(.06”) wide

INPUT SPECIFICATIONS

■ DC Current: 0 – 50 mA DC; input resistor incorporated

Minimum span: 1 mA

0 % input: 0 mA DC

■ DC Voltage: 0 – 10 V DC

Minimum span: 1 V

0 % input: 0 V DC

INSTALLATION

Power consumption

•AC: Approx. 3.5 VA (single) or 5.5 VA (dual)

•DC: Approx. 2 W (single) or 4 W (dual)

Operating temperature: 0 to 50°C (32 to 122°F)

Operating humidity: 40 to 80 % RH (non-condensing)

Mounting: Panel flush mounting

Weight:

290 g (0.64 lbs) for 48V-1, DC powered

320 g (0.71 lbs) for 48V-1, AC powered

340 g (0.75 lbs) for 48V-2, DC powered

370 g (0.82 lbs) for 48V-2, AC powered

PERFORMANCE in percentage of span

Accuracy: ±1 % ±1 digit

Response time: 0.5 sec.

Insulation resistance: ≥ 50 MΩ with 500 V DC

(input or power to ground)

Dielectric strength:

2000 V AC @1 minute (input or power to ground)

1500 V AC @ 1 minute (input to AC power)

500 V AC @ 1 minute (input to DC power)

500 V AC @ 1 minute (input 1 to input 2)