MODEL: F2AP

F2AP SPECIFICATIONS

ES-5436 Rev.6 Page 1/3

http://www.m-system.co.jp/

Super-mini Signal Conditioners F2 Series

DC/FREQUENCY CONVERTER

Functions & Features

• Providing a pulse rate output in proportion to DC input

signal

• High-density mounting

Typical Applications

• Totalizing applications in combination with a counter

22.5 (.89)

75

(2.95)

mm (inch)

107

(4.21)

MODEL: F2AP–[1][2]–R[3]

ORDERING INFORMATION

• Code number: F2AP-[1][2]-R[3]

Specify a code from below for each [1] through [3].

(e.g. F2AP-61-R/Q)

• Special input range (For codes Z & 0)

• Output frequency range (e.g. 0 – 500 Hz)

• Specify the specification for option code /Q

(e.g. /C01)

[1] INPUT

Current

A: 4 – 20 mA DC (Input resistance 250 Ω)

D: 0 – 20 mA DC (Input resistance 50 Ω)

G: 0 – 1 mA DC (Input resistance 1000 Ω)

H: 10 – 50 mA DC (Input resistance 100 Ω)

Z: Specify current (See INPUT SPECIFICATIONS)

( 0 % input must be 0 mA.)

Voltage

3: 0 – 1 V DC (Input resistance 1 MΩ min.)

4: 0 – 10 V DC (Input resistance 1 MΩ min.)

5: 0 – 5 V DC (Input resistance 1 MΩ min.)

6: 1 – 5 V DC (Input resistance 1 MΩ min.)

0: Specify voltage (See INPUT SPECIFICATIONS)

( 0 % input must be 0 V.)

[2] OUTPUT

1: Open collector (max. 1 kHz)

2: 5 V pulse (max. 1 kHz)

POWER INPUT

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

[3] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

GENERAL SPECIFICATIONS

Construction: Stand-alone; terminal access at the front

Connection: Euro type connector terminal

Housing material: Flame-resistant resin (black)

Isolation: Input to output to power

Zero adjustment: 0 – 5 % (front)

Span adjustment: 95 to 105 % (front)

INPUT SPECIFICATIONS

■ DC Current: Input resistor incorporated

Specify input resistance value for code Z.

■ DC Voltage: 0 – 30 V DC

Minimum span: 1 V

Input resistance: ≥ 1 MΩ

OUTPUT SPECIFICATIONS

■ Open Collector: 30 V DC @100 mA (resistive load)

Frequency range: 0 – 10 pulses/hour through 1 kHz

Saturation voltage: 0.6 V DC

■ 5 V Pulse

Frequency range: 0 – 10 pulses/hour through 1 kHz

Hi level: 3.0 – 5.5 V

Lo level: ≤ 0.5 V

Load resistance: 250 Ω min.