MODEL: F2PP

F2PP SPECIFICATIONS

ES-5438 Rev.6 Page 1/3

http://www.m-system.co.jp/

Super-mini Signal Conditioners F2 Series

PULSE ISOLATOR

Functions & Features

• Galvanically isolating pulse rate signals

• Input frequency = output frequency

• Various outputs (open collector and voltage pulses)

• High-density mounting

Typical Applications

• Isolating field pulse signals in order to reduce noises

• Changing e.g. dry contact signal to e.g. 5 V signals

22.5 (.89)

75

(2.95)

mm (inch)

107

(4.21)

MODEL: F2PP–[1][2][3]–R[4]

ORDERING INFORMATION

• Code number: F2PP-[1][2][3]-R[4]

Specify a code from below for each of [1] through [4].

(e.g. F2PP-33N-R/Q)

• Frequency range (e.g. 0 – 1000 Hz)

• Specify the specification for option code /Q

(e.g. /C01)

[1] INPUT

1: Mechanical contact (max. 30 Hz)

2: Open collector (max. 10 kHz)

3: Voltage pulse (max. 10 kHz)

Note: When the output signal is Low frequency open

collector, the max. input frequency is 30 Hz.

[2] OUTPUT

1: Low frequency open collector (max. 30 Hz)

2: High frequency open collector (max. 10 kHz)

3: 5 V pulse (max. 10 kHz)

4: 12 V pulse (max. 10 kHz)

5: 24 V pulse (max. 10 kHz)

[3] OUTPUT LOGIC

N: The same as the input

R: Inverted

POWER INPUT

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

[4] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

GENERAL SPECIFICATIONS

Construction: Stand-alone; terminal access at the front

Connection: Euro type connector terminal

Housing material: Flame-resistant resin (black)

Isolation: Input to output to power

Frequency range: Input and output are the same.

Chattering protection: Filter provided for mechanical

contact input

Input pulse sensing: DC coupled

INPUT SPECIFICATIONS

Excitation: 12 V DC @30 mA; shortcircuit protection

■ Open Collector

Sensing: Approx. 12 V DC @ 3 mA

ON/OFF level: ≤ 200 Ω / 0.6V for ON, ≥ 100 kΩ / 6V for OFF

Low frequency open collector output

Maximum frequency: 30 Hz

Pulse width time requirement: 10 msec. min. for ON and

OFF

High frequency open collector output

Maximum frequency: 10 kHz

Pulse width time requirement: 10 μsec. min. for ON and OFF

■ Mechanical Contact

Maximum frequency: 30 Hz

Pulse width time requirement: 10 msec. min. for ON and

OFF

Sensing: Approx. 12 V DC @3 mA

ON/OFF level: ≤ 200 Ω / 0.6 V for ON, ≥ 100 kΩ / 6 V for OFF

■ Voltage Pulse: Square or sine waveforms

Low frequency open collector output

Maximum frequency: 30 Hz