MODEL: FAMCL-01

FAMCL-01 SPECIFICATIONS

ES-9031 Rev.4 Page 1/3

https://www.m-system.co.jp/

Remote I/O FAM Series

CC-Link MASTER MODULE

(Yokogawa Electric PLC use)

30

(1.18)

102

(4.02)

mm (inch)

118

(4.65)

MODEL: FAMCL-01

ORDERING INFORMATION

• Code number: FAMCL-01

RELATED PRODUCTS

• Yokogawa Electric PLC: FA-M3V

Recommended CPU module: F3SP71-4S, F3SP76-7S,

F3SP22

• Configurator software (model: FAMCLCFG)

Configurator software downloadable at M-System’s web

site. In order to use FAMCLCFG, YOKOGAWA Electric

Corporation 'WideField3' (R.3.02 or later) is required. FAMCL

-01 and a PC are connected through the CPU unit of FA-M3V.

PACKAGE INCLUDES...

• Terminating resistor 110Ω (0.5W): 2 pcs.

GENERAL SPECIFICATIONS

Connection

CC-Link: Separable tension clamp terminal

Cable connector: TFMC1,5 / 5–STF–3,5

(Phoenix Contact) (included in the package)

Recommended solderless terminal

Internal bus: Via the Installation Base

Internal Power: Via the Installation Base

Max. installable module: 2

Installable unit: Main unit and sub unit

Isolation: CC-Link or FG to internal bus or internal power

Status indicator LEDs:

• RDY, RUN, LRUN, SD, RD: Green LED

• ERR, LERR: Red LED

CC-Link COMMUNICATION

CC-Link: Ver. 1.10/2.00

Master function: Master station (local station, standby

master station not supported)

Station address: 00 (Use with '00'. Works as '00' even set to

other than '00'.)

Supported slave station:

Remote I/O station

Remote device station (Ver. 1.10)

Remote device station (Ver. 2.00)

Intelligent device station, local station not supported

Max. number of units connected:

64 (Remote I/O station)

42 (Remote device station)

Max. number of link points:

RX: 8192 (Data unit: bit)

RY: 8192 (Data unit: bit)

RWr: 2048 (Data unit: word)

Rww: 2048 (Data unit: word)

Protocol: CC-Link Ver. 1.10 conformed

Network topology: Multi-drop

Max. overall cable extension length:

100 m (10 Mbps), 160 m (5 Mbps),

400 m (2.5 Mbps), 900 m (625 kbps),

1200 m (156 kbps)

Transmission media: CC-Link Ver. 1.10 compatible cable

Operational station: Master station

Operational mode: On-line mode

Communication mode: Cyclic transmission

Baud rate: 156 kbps, 625 kbps, 2.5 Mbps, 5 Mbps, 10 Mbps,

set with rotary switch

Slave station settings: With configurator software (model:

FAMCLCFG)

INSTALLATION

Current consumption: 600 mA @ 5V DC

Operating temperature: 0 to 55°C (32 to 131°F)

Operating humidity: 10 to 90 %RH (non-condensing)

Atmosphere: No corrosive gas or heavy dust

Mounting: Installation Base Module (model: F3BUxx-0N or

F3BU05-0D)