MODEL: F2SP

F2SP SPECIFICATIONS

ES-5434 Rev.6 Page 1/3

http://www.m-system.co.jp/

Super-mini Signal Conditioners F2 Series

LOW FREQUENCY TRANSMITTER

(50 Hz minimum)

Functions & Features

• Converting the output from a pulse-type transducer into a

standard process signal

Typical Applications

• Positive displacement flowmeters, turbine flowmeters and

vortex flowmeters

• Proximity switches

22.5 (.89)

75

(2.95)

mm (inch)

107

(4.21)

MODEL: F2SP–[1][2]–R[3]

ORDERING INFORMATION

• Code number: F2SP-[1][2]-R[3]

Specify a code from below for each of [1] through [3].

(e.g. F2SP-2A-R/Q)

• Frequency range (e.g. 0 – 10 kHz)

• Special output range (For codes Z & 0)

• Specify the specification for option code /Q

(e.g. /C01)

[1] INPUT

1: Dry contact

2: Voltage pulse

[2] OUTPUT

Current

A: 4 – 20 mA DC (Load resistance 750 Ω max.)

B: 2 – 10 mA DC (Load resistance 1500 Ω max.)

C: 1 – 5 mA DC (Load resistance 3000 Ω max.)

D: 0 – 20 mA DC (Load resistance 750 Ω max.)

E: 0 – 16 mA DC (Load resistance 900 Ω max.)

F: 0 – 10 mA DC (Load resistance 1500 Ω max.)

G: 0 – 1 mA DC (Load resistance 15 kΩ max.)

Z: Specify current (See OUTPUT SPECIFICATIONS)

Voltage

1: 0 – 10 mV DC (Load resistance 10 kΩ min.)

2: 0 – 100 mV DC (Load resistance 100 kΩ min.)

3: 0 – 1 V DC (Load resistance 1000 Ω min.)

4: 0 – 10 V DC (Load resistance 10 kΩ min.)

5: 0 – 5 V DC (Load resistance 5000 Ω min.)

6: 1 – 5 V DC (Load resistance 5000 Ω min.)

0: Specify voltage (See OUTPUT SPECIFICATIONS)

POWER INPUT

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

[3] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

GENERAL SPECIFICATIONS

Construction: Stand-alone; terminal access at the front

Connection: Euro type connector terminal

Housing material: Flame-resistant resin (black)

Isolation: Input to output to power

Zero adjustment: -5 to +5 % (front)

Span adjustment: 95 to 105 % (front)

Input pulse sensing: DC coupled; detecting pulse rise

Input filter: Provided with input range <100 Hz with dry

contact input

(time constant approx. 1 msec.)

Low-end cutout: 2 to 5 %