MODEL: F2PP

F2PP SPECIFICATIONS

ES-5438 Rev.6 Page 2/3

http://www.m-system.co.jp/

Pulse width time requirement: 10 msec. min. for ON and

OFF

High frequency open collector output

Maximum frequency: 10 kHz

Pulse width time requirement: 10 μsec. min. for ON and OFF

Voltage range: -30 – +30 V DC

Hi/Lo level: 2 – 30 V for high level; ≤ 1 V for low level

Input impedance: 10 kΩ minimum

OUTPUT SPECIFICATIONS

■ Low Frequency Open Collector:

50 V DC @100 mA (resistive load)

Maximum frequency: 30 Hz

Timer: Limits within 75 ±25 msec.

for wider than 75 msec. pulses

ON time for output logic non-inverted

OFF time for output logic inverted

Saturation voltage: 0.5 V DC

■ High Frequency Open Collector:

50 V DC @100 mA (resistive load)

Maximum frequency: 10 kHz

Saturation voltage: 0.5 V DC

■ Voltage Pulse

Maximum frequency: 10 kHz

High level: Rating (5, 12 or 24 V) ±10 %

Low level: ≤ 0.5V

Load resistance:

≥ 250 Ω for 5 V

≥ 600 Ω for 12 V

≥ 1200 Ω for 24 V

INSTALLATION

Current consumption

•DC: Approx. 80 mA

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: DIN rail

Weight: 150 g (0.33 lb)

PERFORMANCE

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 2000 V AC @1 minute (input to output

to power to ground)

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

RoHS Directive

EN 50581

Approval:

UL/C-UL general safety requirements

(UL 3111-1, CAN/CSA-C22.2 No.1010-1)